General
6of32Megabloc
1 General
1.1 Principles
This operating manual is supplied as an integral part of the type series and variants indicated on
the front cover. The manual describes the proper and safe use of this equipment in all phases of
operation.
The name plate indicates the type series and size, the main operating data, the order number
and the order item number. The order number and order item number uniquely identify the
pump (set) and serve as identification for all further business processes.
In the event of damage, contact your nearest KSB service centre immediately to maintain the
right to claim under warranty.
1.2 Equipment assembly
To install equiment supplied by KSB, refer to the sub-sections under Servicing/Maintenance.
(⇨ Section 7 Page 25)
1.3 Target group
This manual is aimed at the target group of trained and qualified specialist technical personnel
(⇨ Section 2.4 Page 8)
1.4 Other applicable documents
Table 1: Overview of other applicable documents
Document Contents
Data sheet Description of the technical data of the pump (set)
General arrangement drawing/
outline drawing
Description of mating and installation dimensions
for the pump (set), weights
Hydraulic characteristic curve Characteristic curves showing head, NPSH
required, efficiency and power input
General assembly drawing Sectional drawing of the pump
Spare parts lists Description of spare parts
List of components Description of all pump components
1.5 Symbols
Table 2: Symbols used in this manual
Symbol Description
✓ Conditions which need to be fulfilled before proceeding with the step-by-
step instructions
Safety instructions
⇨
Result of an action
⇨
Cross-references
Symbol Description
1. Step-by-step instructions
Note
Recommendations and important information on how to handle the
product
To Next Page
Loading...
Need help?
General
