▓Fix ( single data value)
▓Use [up]/[down] keys to
move the arrow point (→)
of left side, after pointing
to the item wanted to fix,
Press [OK] button,。
→IAP COMP.----------------------kpa
IAP CMD------------------------kpa
IAP ANGLE----------------------CA
O2S SENSOR VALID---------------
O2S SENSOR VALID #2------------
O2S VOLT.---- -----------------mV
O2S VOLT#2---------------------mV
ENGINE RPM--------------------rpm
TPS---------------------------pct
TPS COMP.---------------------pct
To Next Page
Loading...