KTC COMPACK 2 - Page 18

CONFIDENTIAL - This document is the property of K.T.C. S.r.l. and cannot be reproduced or issued to third parties without written
authorization. K.T.C. shall safeguard its rights to the full extent of the law.
USER MANUAL AND INSTALLATION
COD. 091052 - REV. 07 - DATE 11/2016
Pag.18 di 45
In this version, the compressor must be set between a floor and legs of the compressor,
through no.4 M8 screws.
If necessary, refer to ch. 3 DIMENSIONS to assess the interests of a puncture.