KTM 1290 SUPER ADVENTURE R 2021 User Manual

SERVICE WORK ON THE ENGINE 19
149
E02397-11
Main work
–
Remove filler plug
1
with the O-ring.
E02278-10
–
Add the engine oil to upper marking
A
on the engine oil level
viewer.
Condition
Ambient temperature: ≥ 0 °C (≥ 32 °F)
Engine oil (SAE 10W/50) ( p. 170)
Condition
Ambient temperature: < 0 °C (< 32 °F)
Engine oil (SAE 5W/40) ( p. 171)
Info
In order to achieve optimal engine oil performance, it is
not advisable to mix different engine oils.
KTM recommends changing the engine oil.
– Mount the filler plug with the O-ring.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
– Always make sure there is sufficient ventilation
when running the engine.
– Use effective exhaust extraction when starting or
running the engine in an enclosed space.
– Start the engine and check for tightness.
Finishing work
– Check the engine oil level. ( p. 145)

KTM 1290 SUPER ADVENTURE R 2021 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Fuel Tank Capacity	23 liters
Seat Height	880 mm
Dry Weight	221 kg
Rear Suspension	WP XPLOR PDS shock absorber
Front Tire	90/90-21
Rear Tire	150/70-18
Compression Ratio	13.1:1
Starter	Electric
Cooling System	Liquid cooled
Lubrication	Forced oil lubrication with 3 oil pumps
Traction Control	MTC (Motorcycle Traction Control), lean-angle sensitive
Power	160 hp
Torque	138 Nm
Front Suspension	WP XPLOR 48 mm, fully adjustable
Front Brake	Dual 320 mm discs, 4-piston calipers
Rear Brake	Brembo 2-piston caliper, 267 mm disc
ABS	Bosch 9.1MP (Cornering ABS)
Ground Clearance	250 mm
Fuel System	Keihin EFI
Frame	Chromium-Molybdenum steel trellis frame, powder coated