Why my KTM 250 EXC SIX DAYS TPI 2022 Motorcycle engine has no idle speed?
If your KTM Motorcycle engine has no idle speed, the possible causes include a defective spark plug, which you should change. Another potential reason is faulty ignition, so you should check the ignition coil and the spark plug connector. Also, the idle speed may not be set correctly, so adjust the idle speed.
How to fix a KTM Motorcycle when the engine cannot be cranked?
If the engine of your KTM Motorcycle cannot be cranked, it could be due to several reasons. First, ensure you are following the correct start procedure, as it might be an operating error. Another common cause is a discharged 12-V battery, so you should charge the battery and check the charging voltage, closed current, and the stator winding of the alternator. Also, the main fuse might be blown, in which case you should replace it. Finally, the starter relay or starter motor could be faulty, so check them.
General| Engine Type | 1-cylinder, 2-stroke engine |
|---|---|
| Bore x Stroke | 66.4 x 72 mm |
| Starter | Electric starter |
| Transmission | 6-speed |
| Final Drive | Chain |
| Seat Height | 960 mm |
| Ground Clearance | 370 mm |
| Displacement | 249 cm³ |
| Ignition | Digital |
| Front Suspension | WP XACT 48 mm USD fork |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Fuel Tank Capacity | 9 liters |
| Wheelbase | 1, 487 ± 10 mm |
To Next Page
