Need help?Do you have a question about the KTM 250 SX-F 2024 and is the answer not in the manual?
General| Engine Type | 1-cylinder, 4-stroke engine |
|---|---|
| Starter | Electric starter |
| Transmission | 5-speed |
| Cooling | Liquid cooling |
| Front Suspension | WP XACT-USD, Ø 48 mm |
| Rear Suspension | WP XACT Monoshock with linkage |
| Weight (without fuel) | 99 kg |
| Lubrication | Pressure lubrication with 2 oil pumps |
| Ground Clearance | 370 mm |
| Displacement | 249.9 cm³ |
| Fuel System | Keihin EFI, throttle body 44 mm |
| Frame | Central double-cradle type 25CrMo4 steel |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Clutch | Wet, multi-disc clutch, Brembo hydraulics |
| Bore x Stroke | 78 x 52.3 mm |
| Fuel Tank Capacity | 7.2 liters |
Defines the meaning of various symbols used in the manual.
Explains the typographical formats like proprietary names and underlined terms.
Covers transport mode, diagnostics connector, and initial setup in KTM Dealer.net.
Instructions for unpacking the vehicle, removing packaging, and checking supply scope.
Instructions for removing cable ties, positioning the handlebar, and routing cables correctly.
Steps for positioning controls on the handlebar and preassembling hand guards.
Instructions for mounting hand guards and installing the start number plate.
Mounting the Connectivity Unit and handlebar cushion for SX-F Factory Edition.
Steps for mounting the Factory-Start system with footrest and pin.
Mounting frame protectors and engine guards for specific models.
Connecting battery cables, charging the 12-V battery, and related safety.
Applying stickers, final checks, and preparing the vehicle for customer handover.
Step-by-step guide to removing the front wheel and its components.
Procedures for removing and raising the motorcycle using a lift stand.
Detailed steps for removing the front wheel, including brake caliper and spindle.
Steps for removing front wheel spacers and the brake disc guard.
Guide for installing the front wheel, including bearings, spacers, and spindle.
Steps for positioning and mounting the front fender with screws.
Safety precautions and steps for removing the vehicle seat.
Instructions for correctly attaching and securing the vehicle seat.
Mounting frame protectors and engine guards for specific models.
Procedures for charging the 12-V battery and making electrical connections.
Details on battery discharge, charging methods, and maintenance.
Steps for battery terminal connection and fuel cap operation.
Instructions for correctly closing the fuel tank filler cap and routing the breather hose.
Safety warnings and guidelines for refueling the vehicle.
Details on total fuel tank capacity and recommended fuel types.
A table listing various screws and their specified tightening torques for the chassis.
Lists tightening torques for rear brake disc, seat fixing, and throttle grip screws.
Guidelines and warnings for using super unleaded fuel with ROZ 95 rating.
Guidelines and warnings for using super unleaded fuel with RON 95/97 rating.
Information on recommended long-life grease and its supplier.
To Next Page
