Need help?Do you have a question about the KTM 350 EXC-F 2018 and is the answer not in the manual?
General| Engine Type | Single cylinder, 4-stroke |
|---|---|
| Displacement | 349.7 cc |
| Bore x Stroke | 88 mm x 57.5 mm |
| Starter | Electric starter |
| Transmission | 6-speed |
| Cooling | Liquid cooled |
| Rear Suspension | WP Xplor PDS shock absorber |
| Front Brake | Disc brake, 260 mm |
| Rear Brake | Disc brake, 220 mm |
| Ground Clearance | 370 mm |
| Seat Height | 960 mm |
| Compression Ratio | 12.3:1 |
| Rear Tire | 140/80-18 |
| Wheelbase | 1482 mm |
| Frame | Central tube frame made of chrome molybdenum steel tubing |
| Clutch | Wet Multi-Disc DDS Clutch, Brembo Hydraulics |
| Front Tire | 90/90-21 |
| Fuel System | Keihin EFI, throttle body 42 mm |
Defines the meaning of symbols used in the manual.
Explains typographical formats used in the document.
Covers intended use, misuse, safety advice, and risk symbols.
Warns against tampering and details safe operating practices.
Covers protective clothing, work rules, environment, and manual importance.
Covers warranty, fluids, parts, service, and figures.
Information on contacting authorized dealers for support.
Identifies components from the front left view.
Identifies components from the rear right view.
Specifies locations for chassis, type label, key, and engine numbers.
Specifies locations for fork and shock absorber part numbers.
Describes clutch, brake, throttle, and kill switch operation.
Explains horn, light, turn signal, and emergency switches.
Covers starter, mapping switch, and indicator lamps.
Details safe procedures for opening and closing the fuel filler cap.
Describes cold start button and idle speed adjustment.
Identifies shift lever, foot brake, and side stand.
Details procedures for locking the steering.
Details the procedure for unlocking the steering.
Introduces the instrument cluster and setting units.
How to set the clock and view lap times.
Details various display modes like speed, odometer, trip meters.
Displays and settings for trip meters and stopwatches.
Table summarizing instrument functions and operations.
Essential advice for initial operation and engine break-in.
Addresses battery performance and general prep for tough conditions.
Specific preparations for sand, mud, temperature, and snow riding.
Critical pre-ride checks and engine starting procedure.
Covers traction control, gear shifting, and braking techniques.
Instructions for stopping, parking, transport, and refueling.
Notes on service work and lists required maintenance tasks.
Lists recommended maintenance tasks.
Guides on setting suspension and adjusting shock absorber damping.
Explains sag measurement and adjusting shock absorber spring preload.
Details fork damping and spring preload adjustments.
Explains handlebar mounting positions and adjustment.
Procedures for lifting, fork bleeding, cleaning, and removal/installation.
Steps for triple clamp and steering head bearing service.
Procedures for fender, shock absorber, and seat removal/installation.
Covers air filter, silencer, and fuel tank removal/installation.
Procedures for chain cleaning, tension adjustment, and sprocket checks.
Checks for frame, swingarm, cables, and grips.
Details clutch fluid service and engine guard maintenance.
How to check and adjust hand and foot brake levers.
Checks brake disc thickness and front/rear lining thickness.
Procedures for checking/adding front and rear brake fluid and changing linings.
Steps for removing and installing the front wheel.
Procedure for removing and installing the rear wheel.
How to check tire tread depth, age, and air pressure.
How to check and correct spoke tension.
Steps for removing, installing, and recharging the battery.
How to change fuses and service lighting components.
How to check and adjust headlight alignment and find diagnostics.
Procedures for replacing turn signal bulbs and the instrument cluster.
Explains system operation and how to check coolant level/antifreeze.
Step-by-step instructions for draining and refilling coolant.
How to check and adjust throttle cable play and teach valve position.
Explains engine mapping and how to set idle speed.
How to check and adjust the shift lever's basic position.
Instructions for changing fuel screen and checking engine oil level.
Detailed steps for changing engine oil and filter.
Procedure for adding engine oil to the correct level.
Instructions on how to clean the motorcycle safely and effectively.
Steps for maintenance and care during winter operation.
Steps for preparing and storing the motorcycle for extended periods.
Procedures for getting the motorcycle ready after storage.
Lists detailed engine parameters like bore, stroke, and compression ratio.
Specifies torque values for engine and chassis components.
Lists fluid capacities and chassis component details.
Lists electrical system specs and tire sizes/pressures.
Details fork and shock absorber specifications and settings.
Explains symbols indicating errors or driving aids.
Explains symbols providing information.
To Next Page
