KTM 400 SX - Fuel System Operation

ENGLISH
7
Combination switch (EGS)
The rocker switch LIGHTS 1 actuates the high beam or low beam.
= High-beam light
= Low-beam light
The indicator switch
2 returns to central position after actuation. Press indicator
switch towards switch housing to switch off the indicator.
The horn is sounded with button
3.
The light signal (high beam) is actuated with button
4.
NOTE: The engine must be running in order to check that the electric compo-
nents are functioning correctly.
Emergency OFF switch (EGS)
The emergency OFF switch 5 is mainly a safety and emergency switch and
should normally be ON.
When this symbol is concealed by the switch, the ignition circuit will be
short-circuited.
When this symbol is concealed by the switch, the ignition circuit will be
operative and the engine should start when cranked.
The Button
6 is inoperative.
Filler cap
To open filler cap: Pull the tank venting hose 7 from the steering head and turn
the filler cap counter-clockwise.
To close filler cap: Screw on the filler cap clockwise. Place the tank venting hose 7
in the steering head, avoiding any kinks.
1
4
2
3
1
5
6
ignition circuit
short-circuited
engine does not start
ignition curcuit
operative
engine can be start
7