To Next Page
A
Amanda HicksAug 19, 2025
What to do if my KTM Motorcycle engine turns but does not start?
What to do if my KTM Motorcycle engine turns but does not start?
General| Engine Type | Single Cylinder, 4-Stroke |
|---|---|
| Displacement | 449.9 cc |
| Bore x Stroke | 95 mm x 63.4 mm |
| Starter | Electric starter |
| Transmission | 5-speed |
| Fuel System | Keihin EFI, throttle body 44 mm |
| Cooling | Liquid cooled |
| Frame | Central Double-Cradle Type 25CrMo4 Steel |
| Front Suspension | WP XACT-USD, Ø 48 mm |
| Rear Suspension | WP XACT Monoshock with linkage |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Seat Height | 950 mm |
| Compression Ratio | 12.75:1 |
| Ignition | Keihin EMS |
| Ground Clearance | 370 mm |
| Front Brake Caliper | Brembo |
| Rear Brake Caliper | Brembo |
| Final Drive | Chain |
Defines the intended purpose and compliance with motorsports regulations.
Explains danger, warning, caution, and note symbols used in the manual.
Provides crucial instructions for safe operation, including dangers of accidents and poisoning.
Emphasizes the importance of wearing appropriate protective clothing for safety.
Stresses the importance of reading the manual for operation, handling, and service.
Describes the clutch lever on the left handlebar and its hydraulic operation.
Details the hand brake lever on the right handlebar for the front brake.
Explains the throttle grip on the right handlebar for controlling engine speed.
Identifies the start button on the right handlebar and its operational states.
Describes the combination switch for engine mapping and traction control.
Provides instructions and safety warnings for opening the fuel tank cap.
Explains the function of the cold start button for cold engine starts.
Shows the location of the shift lever and gear positions.
Provides essential advice and safety warnings before the first ride.
Details the procedure and guidelines for the engine's running-in phase.
Advises on preparing the vehicle for challenging conditions like sand or mud.
Lists essential checks before every trip to ensure safe operation.
Provides instructions and safety warnings for starting the vehicle's engine.
Explains the function and activation of launch control for optimal acceleration.
Describes the traction control system and how to switch it on/off.
Explains the quickshifter's function for clutchless upshifts.
Offers guidance on proper brake application and safety warnings.
Details the correct procedure and safety precautions for refueling.
Presents the detailed maintenance schedule based on operating hours and time intervals.
Explains how to adjust suspension based on rider weight for optimal handling.
Describes the WP XACT air suspension system used in the fork.
Details the procedure for adjusting low-speed compression damping.
Explains how to adjust the rebound damping of the shock absorber.
Explains how to adjust the air pressure in the fork suspension.
Provides instructions for adjusting the handlebar position and safety warnings.
Guides on cleaning fork dust boots to prevent seal leaks.
Explains how to remove and install the front fork legs.
Explains how to check and adjust steering head bearing play.
Explains and details the procedure for removing and installing the shock absorber.
Explains how to clean the air filter and air filter box.
Details the procedure for adjusting chain tension and rear wheel alignment.
Details how to check the front brake fluid level.
Guides on adding front brake fluid with safety warnings.
Explains how to check the front brake linings for minimum thickness.
Details how to check the rear brake fluid level.
Guides on adding rear brake fluid with safety warnings.
Explains how to check the rear brake linings for minimum thickness.
Guides on safely removing and installing the front wheel.
Explains how to safely remove and install the rear wheel.
Guides on checking tire condition, age, and pressure.
Details the procedure for removing, installing, and charging the 12-V battery.
Explains how to change main fuses and the fuel pump fuse with safety precautions.
Guides on checking and adjusting throttle cable play.
Explains how to change throttle response by swapping guide plates.
Explains how to adjust the engine idle speed.
Guides on changing the fuel screen with safety warnings.
Explains how to check the engine oil level when cold or warm.
Details the procedure for changing engine oil and filter with safety warnings.
Lists common faults, causes, and actions for engine starting and running issues.
Covers faults related to indicator lamps, oil consumption, and battery issues.
