12 SERVICE WORK ON THE CHASSIS
84
V01736-10
Main work
–
Remove screws
1
and take off silencer cap
2
with O-ring
3
.
Info
Do not remove the glass fiber yarn filling.
Caution
Danger to health Soot particles irritate the eyes and mucuous membranes.
– Wear suitable breathing and eye protection when cleaning the main silencer and carbon screen.
–
Clean main silencer sleeve
4
and screen
5
of the spark arrestor with compressed air.
–
Mount new O-ring
3
on silencer cap
2
.
–
Position silencer cap
2
. Mount and tighten screws
1
.
Guideline
Screws on main silencer M5 7 Nm (5.2 lbf ft)
Finishing work
– Install the main silencer. ( p. 83)
To Next Page
Loading...
Need help?
General
