Why KTM 790 Duke 2019 combination instrument shows nothing on the display?
If the combination instrument on your KTM Motorcycle shows nothing on the display, it could be due to a blown fuse 1 or 2. Change the fuses and then set the time and date.
How to fix KTM 790 Duke 2019 Motorcycle headlight and position light if they are not functioning?
If the headlight and position light on your KTM Motorcycle are not working, check fuse 6 and replace it if it's blown.
General| Displacement | 799 cc |
|---|---|
| Bore x Stroke | 88 mm x 65.7 mm |
| Compression Ratio | 12.7:1 |
| Power | 105 hp (77 kW) @ 9, 000 rpm |
| Torque | 87 Nm @ 8, 000 rpm |
| Transmission | 6-speed |
| Fuel System | Electronic Fuel Injection |
| Rear Suspension | WP monoshock |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 180/55 ZR 17 |
| Seat Height | 825 mm |
| Dry Weight | 169 kg |
| Engine Type | 2-cylinder, 4-stroke, parallel twin |
| Frame | Chromoly-steel trellis frame, powder coated |
| Front Suspension | WP upside-down fork, 43 mm |
| Front Brake | 2 x 300 mm disc, 4-piston radial fixed caliper |
| Rear Brake | 240 mm disc with single-piston caliper |
| Fuel Tank Capacity | 14 liters |
| ABS | Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode) |
Defines proper usage and warns against improper operation of the vehicle.
Details severity levels (Danger, Warning, Note) and associated warning symbols.
Provides critical instructions for safe riding, including rider fitness and hazards.
Details warranty coverage conditions and the requirement for authorized service.
Locates and describes the VIN, essential for vehicle identification and registration.
Identifies and describes primary controls on the left and right handlebars.
Provides essential advice and warnings before the initial ride of the motorcycle.
Lists essential checks and maintenance measures before operating the vehicle.
Guides on how to safely start the engine and begin riding the motorcycle.
Provides instructions on proper gear shifting and braking methods for safe riding.
Lists mandatory maintenance tasks and their recommended intervals for the vehicle.
Explains the Anti-lock Braking System and its operational principles.
Explains how to inspect tire condition, tread depth, and set correct pressure.
Details the Motorcycle Traction Control (MTC) system and slip adjustment features.
Guides on checking engine oil level and performing oil and filter changes.
Lists common engine starting and performance problems with possible causes and actions.
To Next Page