Do you have a question about the KTM 1290 Super Duke R 2019 and is the answer not in the manual?
Displacement | 1301 cc |
---|---|
Torque | 141 Nm |
Transmission | 6-speed |
Cooling | Liquid cooled |
Seat Height | 835 mm |
Front Suspension | WP USD Ø 48 mm |
Rear Suspension | WP monoshock |
Front Tire | 120/70 ZR 17 |
Rear Tire | 190/55 ZR 17 |
Fuel System | Electronic fuel injection |
Final Drive | Chain |
Compression Ratio | 13.6:1 |
Traction Control | MTC (Motorcycle Traction Control), lean-angle sensitive |
Engine Type | V-Twin, 4-stroke |
Power | 177 hp |
Fuel Capacity | 18 liters |
Front Brake | 2 x 320 mm discs, Brembo M50 Monobloc calipers |
Rear Brake | 240 mm disc, Brembo caliper |
ABS | Bosch 9ME combined ABS |
Wheelbase | 1482 mm |
Frame | Chromium-Molybdenum steel trellis frame, powder coated |
Dry Weight | 189 kg (417 lbs) |
Explains the meaning of specific symbols used in the manual for clarity.
Explains the typographical formats used throughout the document for consistency.
Details the process of enabling vehicle electronics after transport.
Covers preliminary and main work for unpacking and initial setup.
Step-by-step guide on how to remove the passenger seat.
Instructions for correctly installing the passenger seat.
Procedures for detaching the front rider's seat from the motorcycle.
Steps to correctly attach the front rider's seat.
Safety warnings and preparatory steps for removing the 12-V battery.
Safety warnings and steps for installing the 12-V battery.
Safety advice and initial steps for disconnecting the 12-V battery negative cable.
Safety advice and steps for reconnecting the 12-V battery negative cable.
Warnings, notes, and environmental hazards related to charging the battery.
Critical fire hazard warning and safety precautions for refueling.
Fire hazard warning and procedure for opening the fuel tank filler cap.
Fire hazard warning and procedure for correctly closing the fuel tank filler cap.
Instructions on how to set the clock and date on the vehicle display.
A comprehensive list of torque specifications for chassis components.
Standard classification and guidelines for using super unleaded fuel.