What to do if KTM 1290 Super Duke R 2017 Motorcycle engine turns but does not start?
If your KTM Motorcycle engine turns over but doesn't start, there are a few potential causes. Check if the coupling of the fuel hose connection is disconnected and reconnect it. It could also be a defect in the fuel injection system, which may require diagnostics. Finally, insufficient fuel quality can prevent starting, so try adding suitable fuel.
What causes high oil consumption in my KTM 1290 Super Duke R 2017 Motorcycle?
If your KTM Motorcycle has high oil consumption, it could be because the engine oil level is too high, so check the engine oil level. Alternatively, the engine oil might be too thin (low viscosity), so change the engine oil and oil filter and clean the oil screens.
Why is my KTM 1290 Super Duke R 2017 battery discharged?
If the battery of your KTM Motorcycle is discharged, it might be due to several reasons. One reason could be that the hazard warning flasher is switched on. Make sure to switch it off and recharge the battery. Another reason might be that the battery is not being charged by the alternator. In this case, you should check the charging voltage. Also, leaving the ignition on while parked can drain the battery, so recharge it.
Why does my KTM 1290 Super Duke R 2017 engine die during the trip?
If your KTM Motorcycle engine dies while you're riding, it could be due to a lack of fuel, so refuel your motorcycle. Alternatively, there may be a defect in the fuel injection system, which may require diagnostics.
How to fix a KTM Motorcycle combination instrument that shows nothing on the display?
If the combination instrument on your KTM Motorcycle shows nothing on the display, it could be due to a few reasons. Check if Fuse 1 is blown and change the fuses in the fuse box, or the main fuse is blown and change the main fuse. Also, the battery might be discharged, so recharge the battery and check the open-circuit current.
What to do if the ABS indicator lamp lights up on my KTM 1290 Super Duke R 2017 Motorcycle?
If the ABS indicator lamp lights up on your KTM Motorcycle, it could be due to several reasons. First, check if the ABS fuse is blown and replace the fuses in the fuse box. It might also be due to a large difference in wheel speeds of the front and rear wheels, so stop the vehicle, switch off the ignition, and start it again. Finally, a malfunction in the ABS could be the cause.
Why does my KTM 1290 Super Duke R 2017 Motorcycle engine only turn if the clutch lever is drawn?
If the engine of your KTM Motorcycle only turns when the clutch lever is drawn, it is likely that the vehicle is in gear. Shift the transmission to idle.
What does it mean if my KTM Motorcycle engine turns although a gear is engaged?
If the engine of your KTM Motorcycle turns even when a gear is engaged, it indicates that the safety start system is faulty.
General| Displacement | 1301 cc |
|---|---|
| Bore x Stroke | 108 mm x 71 mm |
| Fuel System | Keihin EFI, 56 mm throttle bodies |
| Transmission | 6-speed |
| Rear Suspension | WP monoshock |
| ABS | Bosch 9ME Combined ABS |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 190/55 ZR 17 |
| Seat Height | 835 mm |
| Dry Weight | 195 kg |
| Power | 177 hp |
| Torque | 141 Nm |
| Frame | Chromium-Molybdenum steel trellis frame |
| Front Suspension | WP Ø 48 mm |
| Front Brake | Dual 320 mm discs, Brembo 4-piston calipers |
| Rear Brake | Brembo two-piston caliper, 240 mm disc |
| Wheelbase | 1482 mm |
| Fuel Tank Capacity | 18 liters |
Congratulates the customer on their new KTM motorcycle.
Explains the meaning of various symbols used in the manual.
Explains the typographical formats used in the document.
Defines intended use and warns against misuse.
Explains danger, warning, caution, and note symbols.
Provides guidelines for safe operation and potential dangers.
Emphasizes protective gear and rules for maintenance.
Details warranty coverage and service requirements.
Recommends using approved KTM parts and accessories.
Discusses service importance and customer assistance.
Illustrates and labels components of the front-left view.
Illustrates and labels components of the rear-right view.
Explains how to find chassis, type, key, and engine numbers.
Describes clutch, brake, throttle, and combination switches.
Explains menu, light, turn signal, and horn controls.
Details Race-on button, steering lock, and immobilizer.
Explains filler cap operation and storage compartment access.
Covers passenger seat removal/mounting and luggage lugs.
Explains the display layout and indicator lamps.
Guides on using the menu for settings and customization.
Details Ride Mode, MTC, ABS, and optional system adjustments.
Explains Bluetooth, KTM MY RIDE, Pairing, Audio, and Telephony.
Covers handlebar position and adjustment methods.
Details adjusting clutch, hand brake, and foot brake levers.
Explains adjusting the shift lever and stub position.
Provides advice for initial use and engine break-in.
Guides on proper vehicle loading and weight limits.
Lists checks before riding and starting procedures.
Covers shifting, riding, MSR, and braking.
Details stopping, parking, and transporting the motorcycle.
Guides on safe refueling practices.
Lists scheduled maintenance tasks and intervals.
Lists recommended maintenance tasks and intervals.
Details compression and rebound damping adjustments for the fork.
Explains low-speed and high-speed shock absorber damping.
Covers adjusting spring pretension and checking static sag.
Details lifting and securing the bike using stands and gears.
Covers passenger/rider seat and helmet lock removal/mounting.
Explains removing and installing the main silencer.
Details checking, cleaning, and adjusting the drive chain.
Explains checking and correcting the hydraulic clutch fluid level.
Explains the ABS system, its modes, and warnings.
Details checking brake disc thickness and condition.
Covers checking and adding front and rear brake fluid.
Explains checking front and rear brake linings for wear.
Details removing and installing the front wheel.
Details removing and installing the rear wheel.
Covers checking tire condition, wear, and pressure.
Explains the function and operation of the DRL.
Details removing, installing, and recharging the battery.
Explains replacing main and fuse box fuses.
Covers checking and adjusting headlight settings.
Locates ACC1 and ACC2 power supplies.
Explains how to check and correct coolant level.
Explains available ride modes (Sport, Street, Rain, Track).
Details Motorcycle Traction Control and slip adjustment.
Explains how to adjust throttle response.
Explains how to check the engine oil level.
Details the process for changing engine oil and filter.
Explains how to add engine oil to the correct level.
Provides instructions for cleaning the motorcycle safely.
Outlines steps for winter storage and maintenance.
Details procedures for storing the motorcycle for extended periods.
Explains steps to take before using the motorcycle after storage.
Lists common faults, their causes, and actions.
Lists detailed specifications for the engine.
Provides chassis and suspension specifications.
Lists tightening torques for various components.
Lists electrical system specifications.
Lists tire size and type.
Lists EU and FCC declarations for wireless systems.
Specifies brake fluid and coolant types and guidelines.
Lists engine oil and fuel grade specifications.
Lists recommended chain care, cleaners, and lubricants.
Explains oil standards for motorcycles.
Explains red, yellow/orange, and green/blue warning symbols.
To Next Page
