What to do if the KTM 1290 Super Duke R engine turns but does not start?
If your KTM Motorcycle engine turns but doesn't start, consider these potential causes: * There may be a defect in the fuel injection system. In this case, read out the fault memory using the KTM diagnostics tool. * The fuel quality might be insufficient. Try adding suitable fuel.
Why is the oil consumption high in my KTM Motorcycle?
High oil consumption in your KTM Motorcycle could be due to several reasons: * The engine oil level may be too high, so check the engine oil level. * The engine oil might be too thin (low viscosity). If so, change the engine oil and filter, and clean the oil screens.
What to do if the KTM 1290 Super Duke R Motorcycle engine does not crank when pressing the electric starter button?
If your KTM Motorcycle engine fails to crank when you press the electric starter button, there are a couple of things you can check: * Ensure the emergency OFF switch is in the ON position. * Make sure you are following the correct start procedure.
Why does the engine die during a KTM 1290 Super Duke R Motorcycle trip?
The engine of your KTM Motorcycle might die during a trip due to a lack of fuel. Refuel your vehicle to solve this problem.
What does it mean if the ABS warning lamp lights up on my KTM Motorcycle?
If the ABS warning lamp lights up on your KTM Motorcycle, it could indicate a couple of issues: * The ABS fuse may be blown. If this is the case, change the fuses in the fuse box. * There might be a large difference in wheel speeds between the front and rear wheels. Try stopping the vehicle, switching off the ignition, and starting it again.
What does it mean if the engine warning lamp lights up or flashes on a KTM 1290 Super Duke R Motorcycle?
If the engine warning lamp lights up or flashes on your KTM Motorcycle, it indicates a defect in the fuel injection system. Read out the fault memory using the KTM diagnostics tool.
What to do if the combination instrument shows nothing on the display of my KTM Motorcycle?
If the combination instrument on your KTM Motorcycle shows nothing on the display, check the following: * Fuse 1 might be blown. Change the fuses in the fuse box. * The main fuse could be blown. Replace the main fuse. * The battery may be discharged. Recharge the battery.
General| Displacement | 1301 cc |
|---|---|
| Transmission | 6-speed |
| Seat Height | 835 mm |
| Fuel Tank Capacity | 16 liters |
| Dry Weight | 189 kg |
| Starter | Electric starter |
| Fuel System | Electronic fuel injection |
| Traction Control | MTC (Motorcycle Traction Control), lean-angle sensitive |
| Wheelbase | 1482 mm |
| Front Tire | 120/70 ZR 17 |
| Rear Tire | 200/55 ZR 17 |
| Engine Type | V-Twin, 4-stroke |
| Power | 180 hp (132 kW) @ 9500 rpm |
| Torque | 140 Nm |
| Frame | Chromium-Molybdenum steel frame, powder coated |
| Front Suspension | WP APEX 48 |
| Rear Suspension | WP APEX monoshock |
| Rear Brake | Brembo two-piston caliper, 240 mm disc |
| Front Brake | Dual 320 mm discs, Brembo Stylema monobloc calipers |
| ABS | Bosch 9.1 MP (incl. Cornering-ABS and Supermoto mode) |
General guidelines for safe motorcycle operation, including warnings about hazards.
Importance and use of appropriate protective gear for rider safety.
Details regarding the motorcycle's warranty coverage and conditions.
Information on essential service, care, and tuning for optimal performance.
Illustration showing major components of the motorcycle from the front left.
Illustration showing major components of the motorcycle from the rear right.
Location and identification of the motorcycle's unique chassis identification number.
Location and identification of the motorcycle's engine serial number.
Description of the clutch lever operation and its hydraulic activation.
Description of the hand brake lever and its function for the front brake.
Details on switches located on the left handlebar, including lights and signals.
Details on switches located on the right handlebar, including starter and kill switch.
Information on the ignition and steering lock mechanism and its operating states.
Description and function of the motorcycle's side stand.
General overview of the motorcycle's central information display and indicators.
Functionality and control of the main digital display for vehicle information.
Explanation of various warning and status indicator lights on the instrument panel.
Navigation and options within the combination instrument's menu system.
Information on adjusting handlebar position for rider comfort and control.
Procedure for adjusting the clutch lever's reach for optimal hand fit.
Essential advice and safety precautions for the initial use of the motorcycle.
Guidelines for the engine break-in period to ensure longevity and performance.
Pre-ride checks and maintenance essential for safe and roadworthy operation.
Step-by-step instructions for safely starting the motorcycle's engine.
Techniques and advice for smooth gear shifting and general riding practices.
Proper methods and safety considerations for using the motorcycle's braking system.
Schedule of essential maintenance tasks and their recommended intervals.
List of recommended maintenance and checks for optimal vehicle condition.
Procedure for adjusting the fork's compression damping for ride quality.
Procedure for adjusting the fork's rebound damping to control suspension response.
Steps to adjust the shock absorber's low-speed compression damping.
Method for adjusting the shock absorber's spring preload based on load.
Instructions for safely lifting the motorcycle using rear stand equipment.
Steps involved in safely removing the passenger seat from the motorcycle.
Steps and materials required for cleaning the motorcycle's drive chain.
Method for checking the drive chain's tension and identifying wear.
Explanation of the ABS system's function, modes, and limitations.
How to check the front brake fluid level and identify potential issues.
Method for inspecting the front brake pads for wear and minimum thickness.
How to check the rear brake fluid level and identify potential issues.
Step-by-step guide for safely removing the motorcycle's front wheel.
Procedure for correctly installing the motorcycle's front wheel.
Guidelines for inspecting tires for wear, damage, and tread depth.
How to check and adjust tire air pressure for optimal performance and safety.
Method and precautions for charging the motorcycle's battery.
Steps for locating and replacing the main fuse in the electrical system.
Process for programming or deactivating motorcycle ignition keys.
How to check the coolant level in the expansion tank for proper engine cooling.
Procedure for adding or adjusting coolant levels in the compensating tank.
Explanation of selectable engine and traction control modes (Sport, Street, Rain).
Information on the motorcycle's traction control system and its operation.
Method for checking the engine oil level using the oil level viewer.
Steps for performing an engine oil and filter change, including cleaning oil screens.
Instructions on how to properly add engine oil to the motorcycle.
Guidelines for washing and cleaning the motorcycle, including precautions.
Specific procedures for preparing the motorcycle for winter storage or use.
Recommended steps for long-term storage of the motorcycle.
Procedures for getting the motorcycle ready after a period of storage.
Specific torque values for various engine-related screws and bolts.
Specific torque values for various chassis-related screws and bolts.
Fluid capacities for engine oil, coolant, and fuel.
Details on battery, fuses, and lighting system specifications.
Information on recommended brake fluid types and standards.
Specifications for engine oil type SAE 10W/50, including standards and suppliers.
Specifications for engine oil type SAE 5W/40, including standards and suppliers.
Recommended products for cleaning the motorcycle's drive chain.
Recommended products for lubricating the drive chain for road use.
Recommended cleaning products for the motorcycle's exterior.
Explanation of the JASO T903 MA standard for motorcycle engine oils.
Explanation of the SAE viscosity classification system for oils.
To Next Page
