COMBINATION INSTRUMENT 7
117
7.26.20 MTC
F01806-01
Condition
• Cruise control system function (optional) deactivated.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until MTC is marked. Press
the SET button to open the submenu.
– Activate menu item using the UP or DOWN button.
– Switch MTC on or off by pressing the SET button.
Info
Do not open the throttle when switching on or off.
Press the SET button briefly when activating the motor-
cycle traction control.
Hold down the SET button when switching off the
motorcycle traction control.
After the ignition is switched on, motorcycle traction
control is enabled again.
Press and
hold the SET
button for 3 -
5 seconds.
Switching off the motorcycle traction control.
To Next Page
Loading...
