16 ELECTRICAL SYSTEM
312
F03301-10
–
Hang battery mounting bracket
4
to the left and right in the
holding lugs and push downward at the back.
–
Mount and tighten screw
5
.
Guideline
Screw, battery sup-
port bracket
M6 5 Nm (3.7 lbf ft)
–
Position the diagnostics connector
6
in the holder.
Finishing work
– Install the battery cover. ( p. 227)
– Mount the seat. ( p. 211)
– Set the time and date.
To Next Page
Loading...
