Why does my KTM Motorcycle have high oil consumption?
High oil consumption in your KTM Motorcycle can be due to several reasons: * A bent engine vent hose. In this case, route the vent hose without bends or replace it. * Engine oil level being too high. Check the engine oil level. * Engine oil being too thin (low viscosity). Change the engine oil and the oil filter, and clean the oil screens.
What to do if the 12V battery of my KTM 890 DUKE 2021 is discharged?
If the 12V battery of your KTM Motorcycle is discharged, it could be due to: * The ignition not being switched off when the vehicle was parked. In this case, charge the 12-V battery. * The 12-V battery not being charged by the alternator. Check the charging voltage and the open-circuit current.
Why does the ABS warning lamp light up on my KTM 890 DUKE 2021 Motorcycle?
The ABS warning lamp might light up on your KTM Motorcycle due to: * A blown ABS fuse. Replace the ABS fuses. * A large difference in wheel speeds between the front and rear wheels. Stop the vehicle, switch off the ignition, and start it again. * A malfunction in the ABS. Read out the ABS fault memory using the KTM diagnostics tool.
How to fix headlight and position light not working on my KTM 890 DUKE 2021 Motorcycle?
If the headlight and position light are not functioning on your KTM Motorcycle, the cause may be a blown fuse 6. Replace the fuses of individual electrical power consumers.
What to do if combination instrument shows nothing on the display of my KTM 890 DUKE 2021 Motorcycle?
If the combination instrument shows nothing on the display of your KTM Motorcycle, a possible cause is a blown fuse 1 or 2. Replace the fuses of individual electrical power consumers and set the time and date.
Why aren't the turn signal, brake light, and horn working on my KTM Motorcycle?
If the turn signal, brake light, and horn are not working on your KTM Motorcycle, it might be due to a blown fuse 5. Replace the fuses of individual electrical power consumers.
How to correct the time that is not correctly displayed on my KTM 890 DUKE 2021?
If the time is not correctly displayed on your KTM Motorcycle, the cause may be a blown fuse 1. Replace the fuses of individual electrical power consumers and set the time and date.
General| Engine Type | 2-cylinder, 4-stroke, parallel twin |
|---|---|
| Displacement | 889 cc |
| Transmission | 6-speed |
| Seat Height | 820 mm |
| Dry Weight | 169 kg |
| Bore x Stroke | 90.7 mm x 68.8 mm |
| Compression Ratio | 13.5:1 |
| Fuel System | Electronic Fuel Injection |
| Final Drive | Chain |
| Front Suspension | WP APEX 43 |
| Traction Control | MTC (Motorcycle Traction Control) |
| Instruments | TFT display |
| Lighting | LED |
| Power | 115 hp |
| Torque | 92 Nm |
| Fuel Capacity | 14 liters |
| Frame | Chromium-Molybdenum-Steel frame |
| Rear Suspension | WP APEX |
| Front Brake | 2 x 300 mm discs, 4-piston calipers |
| Rear Brake | 240 mm disc |
| ABS | Bosch 9.1 MP (incl. cornering ABS and supermoto mode) |
| Wheelbase | 1, 476 mm |
Defines the vehicle's intended use, limitations, and potential dangers of misuse.
Provides critical safety instructions for operation and warns against tampering with vehicle systems.
Emphasizes the importance of protective gear and outlines rules for performing work on the motorcycle.
Details display items like gear, speed, fuel, temp, trip odometer, and indicator lamps.
Explains Ride Modes, MTC, MSR, ABS Modes, Quickshifter, and Shift Light functions.
Details pre-ride checks, starting the engine, and initial safety warnings.
Explains starting off, Launch Control function, and its operation with warnings.
Details shifting, Quickshifter+, MTC, and engine traction torque control (MSR) functions.
Provides guidance on applying brakes, ABS, stopping, parking, and locking the vehicle.
Covers safety warnings and procedures for refueling and securing the motorcycle for transport.
Lists required and recommended maintenance tasks with their respective service intervals.
Explains the ABS system, its components, operation, and warning lamp indications.
Covers checking tire condition, age, tread depth, and tire pressure specifications.
Details battery charging procedures and changing main, ABS, and individual power consumer fuses.
Explains cooling system function and provides steps for checking antifreeze and coolant levels.
Details checking coolant in compensating tank, refilling, and draining the system.
Details slip adjustment, throttle response, ABS modes, Quickshifter, and Shift Light.
Details safety warnings and steps for changing engine oil, filter, and cleaning oil screens.
Lists common faults related to engine starting, running, power, and overheating.
Provides detailed engine specifications, capacities, and tightening torque values.
Lists chassis, electrical system, and tire specifications, including fork and shock absorber data.
Provides a comprehensive list of tightening torque specifications for chassis components.
To Next Page