SETUP 2
5
800042-10
– Mount the footrests with the springs and pins. Secure the pins
using the washers and cotter pins.
Footrest spring plier (58429083000)
– Install the motor guard. ( p. 10)
– Remove the remaining film, padding, the corrugated card-
board, and the other packaging material.
– Attach the stickers included in the scope of supply (optional).
– Carry out the procedure for unlocking the battery management
system. ( p. 15)
– Charge the Powerpack LV. ( p. 17)
– Prepare the vehicle according to the specifications in
KTM Dealer.net for handover to the customer.
Info
Transport mode must be deactivated to be able to start
the motorcycle.
H03605-01
– Check the factory-set frame height.
» If the frame height is unsuitable for the rider:
– Adjust the seat height on the shock absorber.
( p. 10)
– Adjust the seat height on the fork. ( p. 11)
– Adjust the seat height on the frame. ( p. 12)
To Next Page
Loading...
