EU Certificate of conformity
corresponding to EU directive 2014/34/EU dated 26 February 2014
and to the legal regulations
The manufacturer - KTR Systems GmbH, D-48432 Rheine - states that the
ROTEX
®
GS backlash-free shaft couplings
in an explosion-proof design described in these operating/assembly instructions are devices
corresponding to article 2, 1. of directive 2014/34/EU and comply with the general safety and health
requirements according to enclosure II of directive 2014/34/EU.
The coupling described in here complies with the specifications of the following standards/rules:
DIN EN ISO 80079-36
DIN EN ISO 80079-37
DIN EN ISO 80079-38
IEC/TS 60079-32-1
The ROTEX
®
GS is in accordance with the specifications of directive 2014/34/EU.
According to article 13 (1) b) ii) of directive 2014/34/EU the technical documentation is deposited with
the notified body (type examination certificate IBExU03ATEXB002_05 X):
IBExU
Institut für Sicherheitstechnik GmbH
Identification number: 0637
Fuchsmühlenweg 7
09599 Freiberg
To Previous Page
Loading...