11
Additional Notes:
NOTE: When loading bicycles with 20”-24” front
tires an adapter must be used. Please contact Kuat
Racks directly by calling toll free 1(877)822-5828, or
by emailing us at info@kuatracks.com and a 20”-24”
adapter kit will be provided.
20”-24” Adapter Kit
Tips and Tricks.
• Periodically check all nuts and bolts for proper tightness,
not doing so can lead to premature wear or rack failure.
• Lubricate the lock mechanisms using a light oil. Keep
the cover on the hitch pin lock at all times.
• The 8mm allen wrench can be stored in the rear end
cap for easy access.
• The 8mm allen wrench can be used to tighten and
loosen the cam system.
• Keeping your rack clean will help prevent corrosion
and keep the rack working correctly for years.
• The pivot handle is also designed to be used as foot
pedal when lowering the trays.
• 0DNH VXUH WKH ELF\FOHVâ WLUHV DUH SURSHUO\ LQñDWHG
and free of leaks. Bicycles can become loose if a tire
GHñDWHVZKLOHLQWKHUDFN
NOTE. When loading bicycles with 20”-24” front
tires an adapter must be used. Please contact Küat
Racks directly by calling toll free 1(877) 822-5828, or
by emailing us at info@kuatracks.com and a 20”-24”
adapter kit will be provided.
Tips and Tricks
• Periodically check all nuts and bolts for propert tightness.
Not doing so can lead to premature wear or rack failure.
• Lubricate the lock mechanisms using a light oil.. Keep
the cover on the hitch pin lock at all times.
• The 8mm Allen wrench can be stored in the rear end cap
for easy access.
• The 8mm Allen wrench can be used to tighten and loosen
the cam system.
• Keeping your rack clean will help prevent corrosion and
keep the rack working correctly for years.
• The pivot handle is also designed to be used as a foot
pedal when lowering the trays.
• Make sure the bicycles’ tires are properly inflated and
free of leaks. Bicycles can become loose if a tire deflates
while in the rack.
To Next Page
Loading...
