Kubota B3300SU - Page 26

OPERATING THE ENGINE10
A The speed control pedal automatically returns to
neutral when the operator's foot is released from the
pedal.
3. Place the speed set lever in "OFF"
position. (if equipped)
Place the speed control pedal in
"NEUTRAL" position.
Place the range gear shift lever (L-M-H)
in "NEUTRAL" position.
(1) Range gear shift lever
(L-M-H)
(2) Speed set lever
(3) Speed control pedal
(A) "OFF"
(B) "ON"
(H) "HIGH"
(M) "MIDDLE"
(L) "LOW"
(N) "NEUTRAL POSITION"
4. Lock the loader control lever in
"NEUTRAL" position. (if equipped)
(1) Loader control lever
(2) Lock lever
(A) "LOCK"
5. Place the hydraulic control lever in
"NEUTRAL" position.
(1) Hydraulic control lever (A) "DOWN"
(B) "SLOW DOWN"
(N) "NEUTRAL"
(C) "SLOW UP"
(D) "UP"