Need help?Do you have a question about the Kubota BX1500 and is the answer not in the manual?
General| Engine Type | Diesel |
|---|---|
| Engine Power | 15 hp |
| Cylinders | 3 |
| Fuel Type | Diesel |
| Transmission Type | Hydrostatic |
| Drive | 4WD |
| Fuel Capacity | 5.5 gallons |
| Drive Type | 4WD |
| Width | 44.5 inches |
| Number of speeds | Infinite (Hydrostatic) |
Pre-operation checks and safety guidelines before using the tractor.
Comprehensive guide for operating the tractor safely in various conditions.
Step-by-step instructions for safely starting the tractor engine.
Essential safety advice for operating the tractor on inclines and slopes.
Instructions for safely engaging and using the tractor's Power Take-Off system.
Safe attachment and use of 3-point hitch mounted implements.
Safety labels specific to BX1800 and BX2200 models, detailing hazards.
Locating and recording tractor and engine serial numbers for service.
Detailed technical specifications for BX1500, BX1800, and BX2200 models.
Table showing forward and reverse speeds for different models and gear ranges.
Guidance on maximum weights and loads for hitch and trailer attachments.
Identification of gauges, indicators, and switches on the tractor's instrument panel.
Description and location of all foot pedals and hand levers for tractor operation.
Essential daily inspection steps to ensure safe and proper tractor operation.
Step-by-step procedure for safely starting the tractor engine.
Procedure for properly shutting down the tractor engine.
Precautions for breaking in a new tractor to ensure longevity and performance.
Instructions for adjusting the operator's seat for comfort and safety.
Guidelines for using the seat belt, especially with ROPS installed.
Procedure for checking brake pedal free travel and ensuring proper function.
Instructions for engaging and using the front wheel drive system.
Understanding and responding to warning lamps on the Easy Checker system.
Interpreting the coolant temperature gauge and actions for overheating.
Steps for safely parking the tractor, including brake engagement and securing.
How to use the differential lock for improved traction and safety precautions.
Safety guidelines for driving the tractor on public roads.
Safe operating practices for slopes and uneven ground conditions.
General procedures and safety warnings for operating the tractor's PTO.
How to engage and disengage the PTO clutch for independent control.
Importance of keeping PTO shaft covers and caps in place for safety.
Guidelines for attaching and detaching implements to the 3-point hitch.
Adjusting the top link for proper implement angle and positioning.
Operation of the hydraulic control lever for 3-point hitch implements.
Information on the tractor's auxiliary hydraulic outlets for additional equipment.
Adjusting the cutting height control for mower attachments.
Information on tire types, sizes, and recommended inflation pressures.
Guidance on adding front and rear ballast for stability and traction.
Schedule of required maintenance tasks based on operating hours or time.
Recommended lubricants for various tractor components and their capacities.
Instructions for accessing the engine compartment for checks and service.
Essential daily inspection steps to ensure safe and proper tractor operation.
Procedure for checking and maintaining the correct engine oil level.
Procedure for checking and maintaining the correct transmission fluid level.
Steps for cleaning the panel and radiator screen to prevent overheating.
Maintenance tasks to be performed every 50 operating hours.
Applying grease to lubrication points every 50 operating hours.
Information on battery maintenance, charging, and safety precautions.
Procedure for draining and refilling engine oil and oil filter.
Inspecting fuel lines and filter for damage, leaks, or contamination.
Adjusting the HST neutral spring for proper speed control pedal return.
Steps for replacing the engine oil filter.
Inspecting radiator hoses and clamps for leaks or damage.
Procedure for adjusting front wheel toe-in for proper steering alignment.
Inspecting power steering lines for tightness and damage.
Procedure for draining, refilling, and checking transmission fluid.
Maintenance tasks to be performed every 400 operating hours.
Procedure for adjusting the front axle pivot pin for steering stability.
Consult dealer for replacing the fuel filter element.
Consult dealer for adjusting engine valve clearance.
Replace the air cleaner element annually or after six cleanings.
Complete procedure for flushing the cooling system and changing coolant.
Procedure for removing air from the fuel system.
Steps for replacing headlights and other lights.
Procedures for storing the tractor for extended periods to ensure proper condition.
Steps to prepare the tractor for use after storage.
Diagnosing and resolving common engine problems and their causes.
List of available optional equipment for the tractor.
To Next Page
