Name: Kubota BX24
Brand: Kubota
Rating: 5 (1 reviews)

To Next Page

To Previous Page

1-S18

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

ENGINE

Injection Timing (Continued)

NOTE

• The sealant is applied to both sides of the shims (soft metal

gasket shim). The liquid gasket is not required for

assembling.

• Shims are available in thickness of 0.20 mm (0.0079 in.), 0.25

mm (0.0098 in.) and 0.30 mm (0.0118 in.). Combine these

shims for adjustments.

• Addition or reduction of shim (0.05 mm, 0.0020 in.) delays or

advances the injection timing by approx. 0.0087 rad (0.5 °).

• In disassembling and replacing the injection pump, be sure

to use the same number of new shims with the same

thickness.

• Refer to figure of the shim to check the thickness of the

shims.

W1018986

KiSC issued 08, 2019 A

Other manuals for Kubota BX24

Questions and Answers:

Need help?

Do you have a question about the Kubota BX24 and is the answer not in the manual?

General