Emission Performance Check Sheet
(Category: Engine Displacement Less than 1 Liter)
November 11, 2010
4
1. Final assembler Information
Final assembler's Name :
Equipment Model Name :
5. Reporter
Reporter (Items 1 ~ 3) : Date :
Date :
Reporter (Item 4) :
4. Emission Performance Result
Test Location :
Engine Serial No. :
TO BE COMPLETED BY KUBOTA
Test Date :
Test Mode :
2. Subject Regulations and Fuels (Mark "X" or Check the box(es) below)
Regulations :
Fuels :
3. Engine Information (Fill when adopted)
Engine Model Name :
3.1 Fuel System and Intake System Specification
For OEM specific engine, attach the drawing or the photo which shows the status of installation on page 5.
*Final assembler to mark "٤" to the parts to install.
*Final assembler to mark "٤" to the parts to install.
* If there are Intake, Fuel or Exhaust system changes at Customer's Product, Emission of application must be rechecked.
(Passed: OK, Failed: X, Not Subject: -)
KUBOTA p/nPart Name
Part Name
OEM p/n Delegated Assembly* Remarks
select from KBT approved parts
select from KBT approved parts
select from KBT approved parts
select from KBT approved parts
Hose between Air Cleaner flange
and Air Cleaner
Hose to attach Air Cleaner inlet
Hose to attach between mixer,
vaporizer, and regulator
*Length:Must be 300+/-20mm
Engine Code :
EPA
Gasoline LPG Natural Gas
CARB 2002/88EC CANADA
other : "Fill in the name of regulation"
Carburetor
Throttle Body
Mixer
Air Cleaner Flange
Inlet Hose 1
Inlet Hose 2
Inlet Hose 3
Air Cleaner
Air Cleaner Hose 1
Air Cleaner Hose 2
Air Cleaner Hose 3
Gas Hose
3.2 Exhaust System Specification
For specification engine model, attach the drawing or the photo which shows the status of installation on page 6.
KUBOTA p/n OEM p/n Delegated Assembly* Remarks
comply with installation instruction
select from KBT approved parts
select from KBT approved parts
Spacer
Catalytic Converter
Catalytic Muffler
4.1 Test Result
Standard Gasoline LPG Natural Gas
HC+NOX ≤ g/kWh
≤ g/kWh
CO
To Next Page
Loading...
