TO THE READER
This WORKSHOP MANUAL has been prepared to provide servicing personnel with
information on the mechanism, service and maintenance of KUBOTA G2160. It is
divided into two parts, “MECHANISM” and “SERVICING” for each section except
“ENGINE” section.
■ MECHANISM
Information on the construction and function are included. This information should be
understood before proceeding with troubleshooting, disassembling and servicing.
■ SERVICING
The heading “GENERAL” includes general precautions, check and maintenance and
special tools. Other section, there are troubleshooting, servicing specification lists,
checking and adjusting, disassembling and assembling, and servicing which cover
procedures, precautions, factory specifications and allowable limits.
All information illustrations and specifications contained in this manual are based on
the latest product information available at the time of publication.
The right is reserved to make changes in all information at any time without notice.
December 2000
© KUBOTA Corporation 2000
To Next Page
