Need help?Do you have a question about the Kubota L3560 and is the answer not in the manual?
General| Series | Grand L60 |
|---|---|
| Engine Type | Diesel |
| Fuel Type | Diesel |
| Drive | 4WD |
| Engine Power | 37 hp |
| Hydraulic System Type | Open Center |
| Type | Tractor |
| Number of Gears | 3 range |
| Weight | 2778 lbs |
| 3-Point Hitch | Category I |
Essential pre-operation checks and safety practices.
Safety guidelines and recommendations for CAB and ROPS.
Precautions to ensure child safety around the tractor.
Safety advice for operating the tractor on slopes.
Safety guidelines for road operation.
Procedures for safely parking the tractor.
Instructions for safe operation of the Power Take-Off.
Guidelines for safe use of the 3-point hitch.
General procedures and safety for tractor maintenance.
Explains the meaning of various safety labels on the tractor.
Details about the KUBOTA Limited Express Warranty.
Procedure for safely decommissioning and disposing of the tractor.
Technical specifications for HST models.
Technical specifications for GST models.
Technical specifications for Manual Transmission models.
Traveling speed charts for HST models.
Traveling speed charts for GST models.
Traveling speed charts for Manual Transmission models.
Hazards and limitations for forestry applications.
Overview of the tractor's control layout.
Identification of controls specific to HST models.
Identification of controls for GST and Manual Transmission models.
Guidelines for breaking in a new tractor for optimal life.
Safe procedures for getting on and off the tractor.
Instructions for folding and unfolding the ROPS system.
Procedures for starting the tractor engine.
Proper use and adjustment of brake pedals.
Procedure for checking brake pedal function and free travel.
Procedures for safely stopping the tractor.
How to engage and disengage cruise control.
Function and operation of the ATA switch.
How to use the shuttle shift lever for forward/reverse.
How to operate the main gear shift lever for speed selection.
How to use the creep gear shift lever for low speed operation.
How to select travel speeds with Manual Transmission.
Operation of the Hi-Lo range gear shift lever.
How to use the synchro-shuttle shift lever for gear changes.
Information on the DPF muffler and its function.
Procedures for starting the tractor engine.
Step-by-step instructions for safely jump-starting the tractor.
How to select and use different HST operating modes.
Using the throttle-up switch for loader and attachment speed.
Operation of the L-M-H range gear shift lever.
How to engage and disengage front wheel drive.
Adjusting engine speed with the hand throttle.
Using the foot throttle for speed control.
Proper engagement and release of the parking brake.
Procedures for safely stopping the tractor.
How to engage and disengage cruise control.
Function and operation of the ATA switch.
How to use the shuttle shift lever for forward/reverse.
How to operate the main gear shift lever for speed selection.
How to use the creep gear shift lever for low speed operation.
How to select travel speeds with Manual Transmission.
Operation of the Hi-Lo range gear shift lever.
How to use the synchro-shuttle shift lever for gear changes.
How to navigate and change display modes on the IntelliPanel.
Procedures for resetting trip meter and setting the clock.
How to view and reset service inspection data.
Checks to perform while operating the tractor.
Explanation of the Easy Checker(TM) warning and indicator lights.
Reading and understanding the fuel gauge.
Reading and interpreting the coolant temperature gauge.
How to read and use the tachometer for engine speed.
How to engage and disengage the differential lock.
Safety guidelines for driving the tractor on roads.
Guidelines for safely transporting the tractor.
How to use and precautions for the power steering system.
Information on the tractor's electrical outlet for implements.
How to engage and disengage the PTO clutch.
Instructions for operating the mid-PTO system.
Procedure for using the PTO system while the tractor is stationary.
PTO related messages displayed on the IntelliPanel.
Proper use and maintenance of PTO shaft covers and caps.
Overview of the 3-point hitch system components.
Information and usage of the tractor's drawbar.
Guide for using hydraulic control units with various implements and soil conditions.
Overview of the 3-point hitch control functions.
Information on remote hydraulic control systems.
How and when to use the valve lock feature.
Details on installing and using remote hydraulic control systems.
Procedures for connecting and disconnecting hydraulic couplers.
Important safety and maintenance information for tires.
Recommended tire inflation pressures.
Information regarding dual tire approval.
Procedures for adjusting wheel tread width.
Guidelines for adding ballast for stability and traction.
Recommended maintenance schedule based on operating hours.
Specifications and recommendations for lubricants, fuel, and coolant.
Step-by-step instructions for opening the tractor hood.
How to open and close the tractor hood.
How to remove the side cover.
How to remove floor sheet cover and hoist the seat.
Daily inspection checklist to ensure safety and performance.
Scheduled maintenance tasks to be performed every 50 operating hours.
Testing the OPC system to ensure it functions correctly.
Ensuring wheel bolts are tightened to the correct torque.
Scheduled maintenance tasks to be performed every 100 operating hours.
Scheduled maintenance tasks to be performed every 200 operating hours.
Scheduled maintenance tasks to be performed every 400 operating hours.
How to clean the water separator.
Scheduled maintenance tasks to be performed every 600 operating hours.
Scheduled maintenance tasks to be performed every 800 operating hours.
Scheduled maintenance tasks performed every 1000 hours or annually.
Scheduled maintenance tasks to be performed every 1500 operating hours.
How to replace the oil separator element.
How to check the PCV (Positive Crankcase Ventilation) valve.
How to check and clean the EGR cooler.
Scheduled maintenance tasks to be performed every 2000 hours or 2 years.
Safety and usage guidelines for antifreeze.
Scheduled maintenance tasks to be performed every 3000 operating hours.
How to clean the DPF muffler by removing ash.
Scheduled maintenance tasks to be performed annually.
Scheduled maintenance tasks to be performed every 2 years.
Scheduled maintenance tasks to be performed every 4 years.
Maintenance tasks performed as needed.
Procedures for storing the tractor for extended periods.
Steps to prepare the tractor for operation after storage.
Common engine problems, causes, and solutions.
Troubleshooting for issues related to the HST transmission.
Troubleshooting for issues related to the GST transmission.
Troubleshooting for issues related to the Manual Transmission.
To Next Page
