8-G8
BX1860, BX2360, BX2660, RCK48(P)-18BX, RCK54(P)-23BX, RCK60B-23BX, LA203, LA243, WSM
G GENERAL
6. CHECK AND MAINTENANCE
• When checking and repairing, park the tractor on flat ground and apply the parking brake.
• When checking and repairing, lower the bucket and stop the engine.
[1] CHECK POINTS OF EACH USE OR DAILY
Checking Transmission Fluid Level
1. Check the oil level at the dipstick (1).
2. If the level is too low, add new oil to the prescribed level at the oil
inlet.
• If oil level is low, do not run engine.
W1010960
Checking Hydraulic Hoses
1. Checking all hydraulic hoses for cuts or wear.
2. If defects are found, replace them.
W1011064
[2] CHECK POINTS OF EVERY 10 HOURS
Greasing
1. Inject grease in all grease fitting with a hand grease gun.
W1011132
Lubricating
1. Lubricate joints of control lever linkage.
W1011274
(1) Dipstick A : Oil level is acceptable within this
range.
(1) Hydraulic Hose
(2) Cardboard
(3) Magnifying Glass
To Next Page
Loading...
