51TIRES, WHEELS AND BALLAST
A Wheels with beveled or tapered holes: Use the
tapered side of lug nut.
A Need to limit turning angle depended on the tire size.
Refer to the chart provided for additional instructions.
BAdjusting Front Wheel Turning Stopper
Bolt
A Always check if tires contact with tractor or loader
frame assemblies.
A Adjust turning angle with provided stoppers if
necessary.
Tire sizes
12.4R24
13.6R24
340 / 85R24
1390 mm 1490 mm 1590 mm 1690 mm
(1) Stopper bolts (A) "FRONT"
(A) 5 mm collar
To Next Page
