5 2015.11 • Table for switch continuity check was changed. 8-S124,
8-S125
• Wrong Correction
Condition for checking connector voltage was corrected. 8-S135
• Wrong Correction
Correct:
Wiring color for terminal 1 is Red/Green
Wiring color for terminal 2 is Black
Wiring color for terminal 3 is Gray/Blue
8-S145
• Wrong Correction
Wiring color for checking connector voltage is Light Green/Red 8-S146
• Wrong Correction
Correct:
Wiring color for terminal 2 is Green/Orange
Wiring color for terminal 3 is Red/Black
8-S153
• Wrong Correction
Correct:
Wiring color for terminal 1 is Red/White
Wiring color for terminal 2 is White/Violet
Wiring color for terminal 3 is Black/White
8-S155
• Wrong Correction
Resistance value in the table was corrected. 8-S161
• Wrong Correction
Terminal No. in the figure was corrected. 8-S165
• Wrong Correction
Correct:
(1) Turn Signal Relay LH, (2) Turn Signal Relay Relay RH 8-S174
• Topic "(3) B2 Power Relay" was added 8-S190
• Wrong Correction
Relay location in the figure was corrected. 9-M8
• Wrong Correction
Table for connector voltage was corrected. 9-S34
• Wrong Correction
Table for connector voltage was corrected. 9-S35
• Wrong Correction
Table for switch continuity check was corrected. 9-S35
• The topic "(3) Wiper Motor" was changed to "(3) Front Wiper Motor". 9-S36
• The topic "(4) Rear Wiper Motor" was added. 9-S37
• The topic "(5) Washer Tank Motor" was added. 9-S38
6 2016.03 • Information Update
Additional fan belt tension information. G-26
• Wrong Correction
Hydraulic pump specification was corrected. 7-S3,
7-S4,
7-S6,
7-S8
Last digit
of the
Code No.
Issue
month
Main Revised Point and Corrective Measures {Search word}
Reference
Page