Why Kubota M7-132 front PTO stops with operational error?
To address an operational error related to front PTO on your Kubota Tractor, note that the front PTO operation is stopped due to engine rpm drop.
What causes operational error during rear PTO operation on Kubota M7-132?
Please stay in the operator's seat while operating the rear PTO on your Kubota Tractor.
What causes operational error with PTO switches on Kubota Tractor?
To avoid operational errors when using PTO switches on your Kubota Tractor, ensure that the PTO switch of EZ-command centre and external PTO switch are not operated at the same time. If the problem persists, contact your dealer.
What causes operational error with engine rpm memory adjustment button on Kubota M7-132?
To prevent operational errors with the engine rpm memory adjustment button on your Kubota Tractor, avoid operating the engine rpm memory adjustment button down and up at the same time. If the problem continues, contact your dealer.
What causes operational error with headland management system function on Kubota M7-132 Tractor?
To prevent operational errors with the headland management system function on your Kubota Tractor, stay in the operator's seat while operating the headland management system.
What causes operational error during front PTO operation on Kubota M7-132 Tractor?
Stay in the operator's seat while operating the front PTO on your Kubota Tractor.
What to do if Kubota M7-132 Tractor shows communication error of DBM?
If you experience a communication error of DBM on your Kubota Tractor, check the fuse and wiring of the dashboard. If there is no damage, contact your dealer.
What causes shuttle lever safety position error on Kubota Tractor?
General| Engine Power | 132 hp |
|---|---|
| Engine Type | 4-cylinder turbocharged diesel |
| Transmission | Power shift |
| Hydraulic System | Open center |
| Weight | 6, 800 kg |
| PTO Speed | 540/1000 RPM |
| Fuel Tank Capacity | 320 L |
Provides essential safety guidelines for tractor operation, including attention to safety labels and personal protective equipment.
Recommends CAB and ROPS use for safety, detailing precautions for their installation and maintenance.
Highlights the dangers of children near the tractor and prohibits their presence or operation.
Details critical safety procedures for operating the tractor on slopes to prevent tip-overs.
Provides safety instructions for road travel, including brake usage and speed management.
Provides an overview of the Intellipanel system's instrument panel, indicators, and displays.
Explains the LCD display functionality, including initial settings and information monitoring.
Guides on setting 3-point hitch functions, including lock, draft control, and lowering speed.
Details how to set and adjust remote control valves for hydraulic implements.
Describes how to set PTO operations, including automatic engagement and height settings.
Covers settings for automatic power shift transmission and engine parameters like rev-limit.
Details settings for CVT sensitivity, response, maximum speed, and engine rpm memory.
Explains how to record, save, load, delete, and modify headland management system programs.
Provides critical safety warnings and instructions for proper foot brake operation.
Details the operation and warning indicators related to the parking brake.
Details safety warnings and operational procedures for the shuttle lever.
Explains the selection and switching of 4WD and AUTO 4WD modes.
Details safety warnings and selection modes for the differential lock system.
Details how to preset and activate cruise control for maintaining a constant traveling speed.
Explains how to interpret Easy Checker™ indicators for troubleshooting tractor issues.
Details engine warning indicators related to control system errors and overheating.
Describes the engine oil pressure warning indicator and actions for low oil pressure.
Offers safety guidelines for road operation, including brake pedal locking and load balancing.
Provides critical safety advice for operating on slopes and uneven terrain to prevent accidents.
Covers rear PTO operation, including clutch control, RPM display, and external switches.
Details front PTO operation, including clutch control, RPM display, and shaft cover procedures.
Provides instructions for attaching implements, including lateral float and top link adjustments.
Details the operation of the front 3-point hitch, including lift control and remote hitch switches.
Explains the 3-point hitch controls, including lock, draft, position, and ride control settings.
Details the operation of remote hydraulic controls and valves for implements.
Explains airflow, air control vents, and operation modes for heating, cooling, and defrosting.
Provides a comprehensive chart of maintenance items and their corresponding service intervals.
Presents a chart detailing maintenance items based on hour meter readings and service intervals.
Lists recommended lubricants, fuels, and coolant types and capacities for the tractor.
Outlines regular maintenance tasks categorized by service intervals (hours/years).
Outlines essential daily inspection steps to ensure safe operation and machine longevity.
Specifies crucial initial servicing tasks required for a new tractor within the first 50 operating hours.
Details the servicing tasks to be performed after the first 50 operating hours on a new machine.
Lists maintenance tasks to be performed every 50 operating hours.
Specifies maintenance tasks to be performed every 100 operating hours.
Outlines maintenance tasks required every 200 operating hours.
Details maintenance tasks to be performed every 250 operating hours.
Lists maintenance tasks to be performed every 400 operating hours.
Specifies maintenance tasks to be performed every 500 operating hours.
Provides guidance on diagnosing and resolving issues with the electric control system.
To Next Page
