OPERATING THE ENGINE22
[HST Type]
A Depress the both brake pedals together, doing so the
cruise control lever automatically returns to the off
position.
A When removing the foot from speed control pedal, the
pedal automatically returns to the neutral position.
3. Make sure the cruise control lever is in
"OFF" position.
Place the Speed control Pedal in
"NEUTRAL" position.
Place the range gear shift lever in
"NEUTRAL" position.
(1) Cruise control lever
(2) Speed control pedal
(3) Range gear shift lever
(N) "NEUTRAL POSITION"
"OFF POSITION"
4. Place the PTO clutch control switch in
"OFF" position.
(1) PTO clutch control switch "ON" (Engaged)
"OFF" (Disengaged)
(A) "PUSH"
5. Place the hydraulic control levers in
"LOWEST" position.
(1) Position control lever
(2) Draft control lever (if equipped)
(A) "DOWN"
0000012651.book Page 22 Thursday, October 1, 2015 3:53 PM
To Next Page
Loading...
