Kubota MX4800 - Cleaning Evacuator Valve; Cleaning Grill and Radiator Screen; Checking DPF Muffler

PERIODIC SERVICE72
BCleaning Evacuator Valve
Open the evacuator valve to get rid of large particles of
dust and dirt.
BCleaning Grill and Radiator Screen
To avoid personal injury or death:
A Be sure to stop the engine before removing the
screen.
A Before checking or cleaning the radiator
screen, stop the engine and wait long enough
until it is cooled down.
1. Check front grill and side screens to be sure they are
clean of debris.
2. Detach the screen with the fixed spring being held up
and remove all foreign materials and clean the front of
radiator completely.
A Grill and screen must be clean from debris to prevent
engine from overheating and to allow good air intake
for the air cleaner.
BChecking DPF Muffler
To avoid personal injury or death:
A Before checking or cleaning the DPF muffler,
stop the engine and wait long enough until it is
cooled down.
Check the DPF muffler and its surroundings for build-up
of anything flammable. Otherwise a fire may result.
(1) Evacuator valve
(1) Radiator screen
(2) Fixed spring
(A) "HOLD UP"
(B) "DETACH"
(1) Oil cooler [HST Type]
(2) Fuel cooler
(1) DPF muffler
0000012651.book Page 72 Thursday, October 1, 2015 3:53 PM