• Check
to see that the longitudinal axis of
machine aligns with that of the truck bed.
• Set the parking brake, stop the engine and
remove the starter key.
• Lower the bucket and attachment to the truck
bed.
• Release the hydraulic pressure in the hydraulic
system by operating control levers.
• Lock all control levers in neutral.
• Secure the steering-frame-lock.
• Block the wheels of machine.
• Securely fasten the machine to the truck with
straps or chains.
(1) Lug (Both sides)
WARNING
T
o avoid personal injury or death:
• Use the locations indicated by marks in the
diagram to tie down the machine
TRANSPORTING BY TRUCK
To Next Page
Loading...
