EasyManua.ls Logo

Kubota R430 - Replacing the Intake Air Line; Replacing the Rubber Piping Related Oil Separator; Replacing the Intake Hose and Intercooler Hose; Replacing the EGR Cooler Hose

Kubota R430
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Replacing the intake air line
1.
Replace the hoses and clamps, if necessary.
(See Checking the fuel line and the intake air line
on page 78)
(1) Hoses (2) Hose clamps
4. Replacing the rubber piping
related oil separator
Consult
your local KUBOTA dealer for replacing the
rubber-piping-related-oil-separator.
5. Replacing the intake hose and
intercooler hose
Consult
your local KUBOTA dealer for replacing the
intake hose and intercooler hose.
6. Replacing the EGR cooler hose
Consult
your local KUBOTA dealer for replacing the
EGR-cooler-hose.
7. Replacing the radiator hoses
(water pipes)
1. Replace the radiator hoses and the clips.
(See
Checking the radiator hoses and the clips on
page 77)
(1) Radiator hose (2) Clip
SERVICE AS REQUIRED
1. Replacing and repairing the
electrical system
Damage to cables and loose connections of the
electrical
system cause malfunctioning and lead to
short circuits, leakage, and fires.
1. Replace and repair the electrical system as quickly
as possible if necessary.
1.1 Replacing the fuses
WARNING
T
o avoid personal injury or death:
Before replacing a fuse, be sure to turn off the
starter switch.
1. Remove the cover of the fuse box.
2. Replace
the blown fuse using a new one of the
same capacity.
Fuse capacities and their circuits are as follows.
(1) Fuse box A (2) Fuse box B
BIENNIAL SERVICING  PERIODIC SERVICE
R430
87

Table of Contents

Related product manuals