Kubota R430 - Page 74

(1) Lift arm attachment pin (2
places)
(2)
Quick coupler pin (2 places)
(3) Bucket link pin (1 place)
(4) Bell crank arm pin (3 places)
(5) Bucket cylinder bottom pin (1
place)
(6) Lift cylinder rod pin (2 pla-
ces)
(7) Lift cylinder bottom pin (2
places)
Greasing the universal joint
1. Apply
the grease to the universal joint at three
grease fittings.
(1) Grease fitting
Greasing the rear frame
1. Apply
the grease to the rear frame at one grease
fitting.
(1) Grease fitting
Greasing the articulation joint
1. Apply
the grease to the articulation joint at one
grease fitting.
(1) Grease fitting
Greasing the steering cylinder bearing
1. Apply
the grease to the steering-cylinder-bearing at
the two grease fittings.
(1) Grease fitting
PERIODIC SERVICE DAILY CHECK
70
R430