To Next PageTo Next PageWhy is my Kubota Compact Loader having starting difficulties?
If your Kubota Compact Loader has starting difficulties, several factors could be the cause. It might be due to a dead battery causing insufficient compression, in which case, you should recharge the battery. Alternatively, the fuel may be too viscous; you should check the fuel tank and the filter, remove any impurities and water, and replace the filter if necessary.
What to do if my Kubota Compact Loader won't start and the fuse is blown?
If your Kubota Compact Loader won't start, one potential cause is a blown fuse. Inspect the fuse and replace it with a fuse of the same capacity if needed.
How to solve starting difficulties of Kubota SVL75-3 in cold weather?
If you are experiencing starting difficulties with your Kubota Compact Loader, especially in winter, it could be due to the oil viscosity being too high, causing the engine to run sluggishly. To resolve this, consider using the engine block heater, which is available as an option.
What to do if Kubota SVL75-3 Compact Loader has air or water in the fuel system and has starting difficulties?
If your Kubota Compact Loader is experiencing starting difficulties, it might be due to air or water in the fuel system. You should remove the water from the fuel tank. Also, check the fuel-pipe-joint-bolts and nuts to ensure they are not loose. Purging of the fuel system as the fuel filter and the supply pump may be needed. See Purging of the fuel system on page 180.
General| Brand | Kubota |
|---|---|
| Model | SVL75-3 |
| Category | Compact Loader |
| Language | English |
Explains the meaning of safety alert symbols (DANGER, WARNING, CAUTION, IMPORTANT, NOTE).
Outlines general precautions and safety measures to take before starting machine operation.
Details safety precautions for operating the machine, including mounting, controls, and environment.
Explains the importance and use of ROPS/FOPS structures and seat belts for safety.
Details the procedure for safely parking the machine.
Outlines safety measures for loading and transporting the machine.
Provides general safety precautions to follow before performing maintenance.
Information about Kubota dealer support and ordering parts.
Details the terms and conditions of the Kubota Limited Express Warranty.
Lists detailed specifications for the Kubota CTL SVL75-3 model.
Provides an overview of the instrument panel indicators, gauges, and icons.
Explains how to operate the touch panel, including touch, slide, scroll, and swipe gestures.
Explains how to use the jog dial for navigation and selection on the instrument panel.
Describes the fuel gauge and provides warnings related to fuel levels.
Explains how to access and view vital machine operating data on the display.
Describes the periodic check system, indicators, and how to perform and reset maintenance items.
Guides on how to adjust or reset maintenance intervals for various machine components.
Describes how to access and view engine system error messages and their details.
Explains various methods to access the audio screen on the display.
Details how to turn the audio system power on and off.
Explains how to use the auto seek function in AM mode for tuning radio stations.
Describes how to use auto seek, adjust frequency, and change channels in FM mode.
Explains different methods to switch to the memo screen.
Guides on entering text into the memo function using the on-screen keyboard.
Lists and illustrates the main control pedals and levers.
Explains how to use the emergency exit window in case of entrapment.
Details the Operator Presence Control (OPC) function for hydraulic system safety.
Guides on checking the armrest function and its relation to hydraulic system lock/unlock.
Explains how to check the seat function and its role in hydraulic control activation.
Details how to adjust the air outlet ports for desired airflow distribution within the cab.
Explains the operation of the air conditioner control panel, including switches and dials.
Details features specific to the cab type machine.
Guides on the operation of the wiper and washer system, including important precautions.
Provides safety warnings and procedures for opening and closing the cab door.
Provides instructions and safety warnings for operating the machine's engine.
Explains the importance of the running-in period for machine performance and longevity.
Provides detailed steps and safety warnings for starting the machine.
Guides on how to adjust the operator's seat for comfort and safety.
Details the correct procedure for fastening and releasing the seat belt.
Guides on connecting and disconnecting hydraulic couplers and operating controls.
Explains how to use the attachment control device for powering attachments.
Provides step-by-step instructions for attaching and detaching implements using the quick-hitch.
Details the process of attaching implements using the hydraulic quick-hitch.
Explains the function of the Bluetooth microphone for hands-free calls.
Details the hands-free phone function, compatibility, and operation.
Lists essential guidelines for safe and effective machine operation.
Offers precautions for traveling on different terrains and avoiding debris.
Details safety measures when operating the machine near water bodies.
Covers critical safety measures for operating the machine on inclines, including speed, bucket position, and orientation.
Details safety warnings and preparation steps for lifting the machine.
Guides on how to correctly connect lifting chains to the machine for lifting.
Provides detailed steps and safety warnings for loading the machine onto a transport vehicle.
Details safety precautions and procedures for towing an operable machine.
Provides safety warnings and procedures for towing an inoperable machine.
Explains the steps and safety precautions for opening and closing the rear door.
Guides on how to open the rear upper cover, including safety warnings for moving parts.
Provides detailed instructions and safety warnings for tilting up the machine's cab for inspection and maintenance.
Explains how to remove floor outlets and discharge mud from the operator cab.
Details how to discharge mud from the main frame, including safety warnings.
Lists essential checks to perform before starting the machine's operation.
Provides safety warnings and steps for checking the engine coolant level.
Details how to check the fuel level and provides warnings about running out of fuel.
Guides on checking the engine oil level and potential issues like fuel dilution.
Details the procedure for draining water from the fuel tank.
Provides safety warnings and steps for checking and adjusting track tension.
Explains the importance and procedure for checking the air cleaner element, especially in dusty conditions.
Guides on cleaning the air cleaner element using compressed air and replacement guidelines.
Provides safety warnings and steps for changing the engine oil.
Guides on replacing the engine oil filter cartridge and related steps.
Details how to check radiator hoses and clamps for leaks and damage.
Provides safety warnings and procedures for checking and adjusting V-belt tension.
Guides on replacing the water separator filter element and checking the O-ring.
Details the procedure for replacing the fuel filter cartridge and purging the fuel system.
Explains how to change the gear oil for the travel motor.
Explains how to replace the hydraulic oil filter.
Details the procedure for changing hydraulic oil, suction filter, and return filter.
Provides specific measures for hydraulic oil and return filter changes when using hydraulic hammers.
Guides on replacing hydraulic hoses.
Provides safety warnings and detailed steps for changing the radiator coolant.
Details replacing fuel hoses and clamps.
Explains how to replace radiator hoses and clamps, with safety warnings.
Provides safety warnings and guidelines for checking refrigerant gas levels.
Details how to drain the water separator when a warning appears.
Explains the procedure for purging air from the fuel system.
Overviews the fuse system and its protection circuits.
Lists the fuse numbers, protected circuits, and their capacities.
Explains the function of slow-blow fuses and their types.
Guides on replacing bolted slow-blow fuses, including battery disconnection.
Lists common engine and system troubles, their causes, and countermeasures.
Explains how to interpret and respond to navigation screen messages and errors.
Details engine system errors, their SPN/FMI codes, and troubleshooting measures.
Explains the automatic DPF regeneration process, warning lamps, and required operator actions.
Guides on how to lock and release the automatic DPF regeneration cycle using the inhibit switch.
Details precautions for operating the machine in cold weather, including fluid replacement and battery care.
Explains procedures for cleaning and storing the machine after cold weather work.
Details the steps for cleaning, oil changes, and battery removal for long-term storage.
Explains procedures for bringing the machine back into service after long-term storage.
Provides a detailed table of recommended lubricants and fuels based on specifications.
Discusses the use of Biodiesel Fuel (BDF), its properties, handling precautions, and warranty implications.
Provides specifications for suitable diesel fuel, including cetane number and standards.
Lists the key dimensions of the SVL75-3 model in a table format.
