To Next PageTo Next Page
Need help?Do you have a question about the Kubota SVL97-2 and is the answer not in the manual?
General| Engine Power | 96.4 HP |
|---|---|
| Travel Speed | 7.5 mph |
| Engine Make | Kubota |
| Engine Model | V3800-CR-TE4 |
| Gross Power | 96.4 HP |
| Displacement | 230 cu in |
| Number of Cylinders | 4 |
| Max Travel Speed | 7.5 mph |
| Track Width | 17.7 in |
| Hinge Pin Height | 128.5 in |
| Travel Speed (Third AI) | 7.5 mph |
| Rated Operating Capacity | 3200 lbs |
| Tipping Load | 9143 lbs |
| Hydraulic Pump Flow | 23.1 GPM |
| Hydraulic System Flow | 23.1 GPM |
Essential safety guidelines before starting and operating the machine.
Detailed safety instructions for operating the machine safely.
Detailed technical specifications of the machine.
Identification and function of dashboard indicators and gauges.
Identification and operation of various control switches.
How to use and check armrest and seat functions for safety.
Process and safety precautions for DPF regeneration.
Details on DEF (AdBlue) properties, handling, quality, and level monitoring.
Detailed procedures for starting, checking, and stopping the engine.
Procedures for starting the machine and adjusting the seat.
Instructions for traveling forward, backward, and turning the machine.
Methods for turning using pivot and spin turns.
How to operate lift arms and use the lift arm stopper.
How to operate the bucket for rolling back and dumping.
Procedures for connecting, disconnecting, and operating auxiliary hydraulic controls.
How to select action modes and check settings for high-flow AUX port.
Steps to set maximum flow volume for AUX ports.
Steps for attaching and detaching with mechanical quick-hitch.
Steps for attaching and detaching with hydraulic quick-hitch.
General guidelines and precautions for machine operation.
Safety measures for operating the machine on inclines.
Instructions and safety precautions for lifting the machine.
Procedures and safety measures for loading the machine onto a transport vehicle.
Daily inspection items to perform before starting the machine.
Maintenance tasks to be performed every 50 service hours.
Maintenance tasks to be performed every 250 service hours.
Procedures for changing the engine oil.
Procedure for changing hydraulic oil and replacing filters.
Table of common problems, causes, and countermeasures.
A list of error codes, their descriptions, and provisional measures.
