To Next PageTo Next Page
Need help?Do you have a question about the Kubota R630 and is the answer not in the manual?
General| Engine Power | 64.4 HP |
|---|---|
| Transmission | Hydrostatic |
| Travel Speed | 12.4 mph |
| Hydraulic Pump Flow | 17.4 GPM |
| Horsepower | 64.4 HP |
| Hydraulic System Flow | 17.4 GPM |
| Lift Height | 106.3 in (2, 700 mm) |
| Fuel Tank Capacity | 21.1 gal |
| Overall Width | 66.9 in (1, 700 mm) |
| Overall Height | 85.4 in (2, 170 mm) |
Essential pre-operation checks and safety considerations for the wheel loader.
Detailed instructions and safety precautions for operating the machine.
Critical safety precautions to follow when performing maintenance or servicing.
Explains the function and operation of various control switches on the machine.
Details the operation and location of control pedals and levers.
Explains the indicators, gauges, and LCD displays on the instrument panel.
Daily pre-operation checks to ensure machine condition and prevent damage.
Explains the function and operation of various control switches on the machine.
Explains indicators, gauges, and LCD displays on the instrument panel.
Details operation of cabin controls like hydraulic locks, AUX ports, safety systems, wipers, lights, and air conditioning.
Information on Diesel Oxidation Catalyst and DPF Muffler, and safety during regeneration.
Explains Auto, Parked, and Inhibit regeneration modes for the Diesel Particulate Filter.
Step-by-step guide for operating the machine during Auto Regeneration Mode.
Explains PM warning levels and necessary actions for DPF regeneration.
Detailed procedure for performing DPF regeneration when the machine is parked.
Guide for using the Inhibit Mode to prevent DPF regeneration when needed.
Operational tips and necessary conditions for effective DPF regeneration.
Procedures for starting the engine for R530 and R630 models.
Essential checks to perform after the engine starts before commencing operation.
Safe procedures for stopping the engine and removing the key.
Safety precautions and minimum distances for working near overhead power lines.
Instructions for fastening and releasing the seat belt for safety.
Steps for safely starting the machine's travel function.
Safe procedures for stopping the machine, including shutdown and key removal.
How to operate auxiliary hydraulic ports for attachments, including lever functions.
Step-by-step instructions for attaching implements using the mechanical quick-hitch.
Step-by-step instructions for detaching implements from the mechanical quick-hitch.
Instructions for attaching implements using the hydraulic quick coupler.
Instructions for detaching implements from the hydraulic quick coupler.
Detailed explanation of how to use the inching and brake pedals for various operations.
Safety instructions and procedures for lifting the machine safely.
General information on maintenance, periodic servicing, and dealer support.
Table detailing inspection and service intervals based on hour meter readings.
Continues the table of inspection and service intervals for various machine components.
Essential checks to perform daily to maintain machine health.
Procedure for checking and topping up engine oil, with important notes.
How to check and replenish hydraulic oil levels, with safety warnings.
Procedure for checking and refilling the fuel tank, with safety precautions.
Steps for checking and adding coolant to the engine, including radiator cap safety.
Procedure for changing the engine oil, with safety warnings.
How to replace the engine oil filter cartridge when changing the oil.
Step-by-step instructions for changing the fuel filter, with safety precautions.
How to replace the HST oil filter, including tightening torque.
Procedure for changing hydraulic oil and replacing the suction filter.
How to replace the air cleaner elements, including cleaning the case.
Table of common troubles, their causes, and countermeasures for the engine.
Table of common troubles, their causes, and countermeasures for hydraulic and electric systems.
List of error codes, their descriptions, machine conditions, and provisional measures.
Continued list of error codes, their descriptions, machine conditions, and provisional measures.
