Why will my Kubota Tractor engine not idle?
If your Kubota Tractor engine will not idle, it could be due to a spark plug not gapped correctly or a faulty spark plug. Refer to the table below for the cause and its corrective measure.
Why are the grass tips jagged and turn grayish brown after cutting with my Kubota T1880 Tractor?
If the grass tips are jagged and turn grayish brown when using your Kubota Tractor, it could be because the blades are dull or worn, or the mower deck is not level. Refer to the table below for the cause and its corrective measure.
Why is the machine operation not smooth on my Kubota T1880 Tractor?
If the machine operation of your Kubota Tractor is not smooth, it could be due to low hydrostatic transmission oil. Refer to the table below for the cause and its corrective measure.
Why are the blades scalping grass on my Kubota T1880?
If your Kubota Tractor blades are scalping grass, it could be due to cutting height being too low, blades speed too fast, ridges in terrain, rough or uneven terrain, bent blade(s), low tire inflation or anti-scalp rollers not adjusted correctly. Refer to the table below for the cause and its corrective measure.
Why is my Kubota T1880 Tractor experiencing excessive vibration?
If your Kubota Tractor is experiencing excessive vibration, it could be due to debris on the mower deck or in the pulleys, a damaged drive belt or PTO belt twisted, damaged pulleys, pulleys out of alignment, or blades out of balance. Refer to the table below for the cause and its corrective measure.
Why is my Kubota Tractor engine knocking?
General| Engine Power | 18 HP |
|---|---|
| Transmission | Hydrostatic |
| Cutting Width | 42 inches |
| Fuel Capacity | 3.6 gallons |
| Weight | 507 lbs |
| Drive | 2WD |
| Fuel Tank Capacity | 3.6 gallons |
| Mower Deck Size | 42 inches |
Explains the meaning of DANGER, WARNING, CAUTION, IMPORTANT, and NOTE symbols.
Guidance on understanding limitations, controls, and safety labels before use.
Instructions for starting and working with the machine, including safety precautions.
Specific safety guidelines for operating the machine on inclines to prevent tip-overs.
Procedures for safely stopping, parking the machine, and dismounting.
Identification and description of critical safety labels on the machine.
Step-by-step guide on how to connect the mower deck to the tractor.
Instructions for adjusting the mower deck height and leveling for optimal cutting.
Procedures for safely starting the engine, including brake and PTO checks.
Specific steps for cold weather starting and safety device checks.
Checks during operation, stopping procedures, and warm-up.
Guidelines for initial operation and break-in of a new machine.
Steps for preparing to operate, including seat, starting, and cruise control.
Procedures for safely parking and transporting the machine.
Tips for effective mowing and achieving the best cut quality.
How to adjust the mower deck height for desired grass length.
Operation and override of the Kubota Reverse Awareness system.
Schedule of maintenance tasks, lubricants, and fuel specifications.
Steps to open hood and recommended pre-operation checks.
Procedures for checking fuel, engine oil, and cooling air intake.
How to check, sharpen, and replace mower blades for optimal cutting.
Table of recommended torque values for various bolts and screws.
Common engine and battery problems and their solutions.
Troubleshooting for general machine and mower performance issues.
To Next Page