To Next PageTo Next Page
Need help?Do you have a question about the Kubota Z411 and is the answer not in the manual?
General| Horsepower | 22 HP |
|---|---|
| Cutting Width | 48 inches |
| Transmission | Hydrostatic |
| Deck Type | Fabricated |
| Displacement | 726 cc |
| Turning Radius | Zero-turn |
| Cutting Height | 1.5 - 4.5 inches |
| Forward Speed | 0 - 8 mph |
| Reverse Speed | 0 - 4 mph |
| Engine Type | Gasoline |
Essential steps and precautions to take before starting machine operation.
Details on the Roll-Over Protective Structure (ROPS) and its safe usage.
Guidelines for safe operation and maneuvering the machine during use.
Crucial safety measures to prevent accidents involving children.
Critical safety advice for operating the machine on inclines and slopes.
Procedures for safely stopping the machine and dismounting.
Details on the KUBOTA Limited Express Warranty and engine warranty.
Guidelines for safely disposing of the machine according to local regulations.
Detailed specifications for the Z411KW, Z421KW, and Z421KWT models.
Guidelines on using implements with the KUBOTA machine to avoid malfunctions.
Identification and location of various controls on the machine's instrument panel.
Step-by-step instructions for attaching the mower deck to the machine.
Procedures for adjusting the mower, including belt and roller settings.
Instructions for safely removing the mower deck from the machine.
Safe practices for mounting and dismounting the machine.
Detailed steps and safety checks for starting the engine.
Specific procedures for starting the engine in cold temperatures.
Importance of warming up the engine and transmission oil in cold conditions.
Safety precautions and procedures for jump-starting the machine's battery.
Steps for safely shutting down the engine and securing the machine.
Guidelines for breaking in a new machine to ensure longevity and performance.
Instructions for safely raising, folding, and securing the ROPS.
Steps for starting the machine, including pre-operation checks and lever positions.
Safety warnings and procedures related to tire pressure and maintenance.
Instructions for removing and installing front caster wheels, including tightening torque.
Schedule of recommended maintenance tasks based on operating hours.
Procedure for opening the machine's step for access.
Instructions for adjusting the operator's seat position safely.
Essential checks to perform daily before operating the machine.
Maintenance tasks to be performed every 25 operating hours.
Maintenance tasks to be performed every 50 operating hours.
Maintenance tasks to be performed every 100 operating hours.
Maintenance tasks to be performed every 200 hours or annually.
Maintenance tasks to be performed every 300 operating hours.
Maintenance tasks to be performed every 400 operating hours.
Maintenance tasks to be performed every 500 operating hours.
Maintenance tasks to be performed every 500 hours or annually.
Maintenance tasks to be performed annually.
Maintenance tasks to be performed every 2 years.
Maintenance tasks to be performed every 4 years.
Maintenance tasks that should be performed as needed.
Procedures for adjusting the motion control levers for optimal operation.
Steps to adjust the transmission's neutral position for proper operation.
Information on adjusting the machine's maximum forward speed.
How to check and align the motion control levers for proper steering.
Steps to adjust the mower lift pedal for desired cutting height.
Procedures for checking and adjusting the mower deck level for optimal cut quality.
Instructions for preparing and storing the machine for extended periods.
Steps to take when taking the machine out of storage and preparing it for use.
Common engine problems, their causes, and corrective measures.
Solutions for common battery-related issues with the machine.
Troubleshooting steps for general machine operation problems.
Solutions for issues related to the mower deck and cutting performance.
