Kubota Z602-E2B User Manual

G-14
SM-E2B SERIES, WSM
G GENERAL
Cleaning Fuel Filter (Element Type only)
1. Close the fuel cock (3).
2. Unscrew the retaining ring (6) and remove the filter cup (5), and
rinse the inside with kerosene.
3. Take out the element (4) and dip it in the kerosene to rinse.
4. After cleaning, reassemble the fuel filter, keeping out dust and
dirt.
5. Bleed the fuel system.
IMPORTANT■
• If dust and dirt enter the fuel, the fuel injection pump and
injection nozzle will wear quickly. To prevent this, be sure
to clean the fuel filter cup (5) periodically.
W1046058
Checking Battery Electrolyte Level
1. Check the battery electrolyte level.
2. If the level is below than lower level line (2), and the distilled water
to pour level of each cell.
W1047154
(1) Cock Body
(2) Air Vent Plug
(3) Fuel Cock
(4) Filter Element
(5) Filter Cup
(6) Retaining Ring
(1) Upper Level Line (2) Lower Level Line
KiSC issued 06, 2006 A

Kubota Z602-E2B Specifications

General

Engine Model	Z602-E2B
Number of Cylinders	2
Combustion System	Direct injection
Starting System	Electric starter
Lubrication System	Forced lubrication
Engine Type	Vertical, water-cooled, 4-cycle diesel
Cooling System	Water-cooled