• Hot surfaces: The temperature of accessible surfaces may be high when
the appliance is operating. Do not touch hot surfaces while the appliance
is in use, or immediately after use. The viewing window and baking tin
will get very hot during the baking process. Always wear oven mitts when
touching the window and removing the baking tin.
• Moving parts: Avoid contact with moving parts.
• Electrical safety: ALWAYS switch off the appliance and unplug it from the
power source after use. NEVER remove the baking tin or disconnect the
plug while the appliance is in use.
General Safety Instructions (Cont.)
• Location: Place the appliance on a heat-resistant, dry and stable surface,
such as a kitchen table or benchtop, so that the appliance cannot tilt or slip.
Leave a space of at least 10cm from the wall, cupboards, other appliances
or ammable items.
• Protect from heat: Do not place the appliance near a hot gas or electric
stove, in a heated oven, or near an open ame or other heat source.
• Do not cover: Do not cover any hot surfaces with any objects. Do not put
ammable materials on top of the appliance. Do not block, cover or touch
the ventilation holes while the appliance is in use.
• Before you start: Check that the lid and baking tin are correctly mounted.
• Filling: To avoid spilling, remove the baking tin from the appliance to ll it.
• Switching on: Only switch on the appliance when it is lled with
ingredients or dough in order to prevent overheating.
• Cleaning: Allow the unit to cool down completely before cleaning it and
before attaching or taking off parts.
• After use: Never use the baking tin for storage of ingredients.
• Repair: Do not replace components yourself except any spare parts
provided by the distributor to avoid any damage or injury.
Safe usage
CAUTION!
To Next Page
Loading...
