The following items are also necessary for the proper use of the Food Processor.
An integral part of using your Food Processor effectively is the correct mounting of
the included blades.
Additional Items
Mounting Blades on Spindle
The spindle is used for
holding the blades or
processing discs securely in
place.
The disc adaptor is used to
secure the processing discs
in place.
The spatula has been
provided for removing
ingredients from the Food
Processor.
1. Locate the slots on the chopping or dough blade. (fig 1)
2. Locate the two corresponding ridges on the spindle. (fig 2)
3. Feed the spindle up through the blade, ensuring the ridges are aligned properly with
two of the slots. (fig 3)
4. Once fed through all the way, you must twist the spindle approximately 20 degrees
anti clockwise to lock it in. (fig 4)
WARNING: Take care when handling the blades as they are sharp and could cause injury,
always hold the blade by the plastic centre.
NOTE: Using any other implements with the Food Processor, such as a metal spatula,
can scratch the inside of the bowl, or cause damage to the blades/processing discs.
g 1 g 2 g 3 g 4
To Next Page
Loading...