Rotary cultivators
38
EL23
Maintenance and storage
Blade mounting chart.
Drive chain tension
The automatic tensioning device ensures correct tension
throughout the chain's service life.
4. Storage
At the end of each season
- Clean the machine thoroughly:
• The rotor.
• The inner panels.
- Touch up paint if necessary.
- Put the machine under cover in a dry place.
- Remove and service the PTO shaft. Follow the
instructions in the PTO shaft's operator's manual.
- Check all tools and their fasteners.
At the start of each season
- Read through the operator's manual again.
- Check the condition of the friction slip clutch.
- Check that all nuts and bolts are sufficiently tightened.
- Make sure all the guards are in place.
- Replace any lost or damaged cover.
EL 23
120
EL 23
150
Number of rotor flanges 67
Type of fitting Type of blades Number of blades
1 pairs of blades
per flange
Right blades 12 14
Left blades 12 14
To Next Page
