Maintenance and storage
Rotary cultivators
EL32
39
Tool replacement
Tool replacement
- Lower the machine.
- Uncouple PTO shaft on machine side.
- The machine rotor is factory set with C-blades.
- Fitting of 2 pairs of blades per flange:
• 2 right blades and 2 left blades.
- Partial replacement:
• Replace concerned tools.
• Tightening torque: 12 daN m (88 lbf ft)
Immediately replace worn or damaged parts
with genuine KUHN parts.
- Right blades: Part no. 51503300.
- Left blades: Part no. 51503200.
To distinguish right blades from left blades, note
that the sharp edge faces the rotor direction of
rotation (1).
To Next Page
