Why does my KUHN EL53 Tiller have excessive power requirement in dry conditions?
Excessive power requirement in dry conditions can occur if the working depth is too deep. To resolve this, set and control the working depth. Another possible cause is incorrect hood positioning, which can be corrected by adjusting the hood position.
Why does my KUHN EL53 have excessive power requirement in wet conditions?
Excessive power requirement in very wet conditions can occur if the working depth is too deep. To resolve this, set and control the working depth. Also, excessively worn tools can cause this issue; replace the whole set of tools to ensure rotor balance.
What to do if my KUHN EL53's tilth is too coarse?
If the tilth is too coarse, it could be due to excessive ground speed. Try reducing the ground speed. Incorrect hood positioning can also cause this; adjust the hood position to correct it.
What to do if my KUHN Tiller has a noisy drive during work?
A noisy drive during work may be due to the machine being tilted to the front or rear. Lengthen or shorten the top link to set the machine horizontally during work. Also, insufficient machine side-to-side stabilization can cause this. Adjust the stabilizers of the lower links to prevent machine side-to-side or up-and-down movements.
What to do if my KUHN Tiller has important ground projections to the rear?
If there are important ground projections to the rear, it may be due to incorrect hood positioning. Adjust the hood position to resolve this.
How to fix ridging across the path width with my KUHN Tiller?
Ridging across the path width can be caused by tractor-machine unit swaying. To fix this, modify one or several adjustment parameters: reduce ground speed, increase working depth, or adjust hood position.
What to do if my KUHN Tiller has a noisy drive when lifting the machine?
A noisy drive when lifting the machine may be due to a badly positioned or adjusted top link of the 3-point hitch. Position the top link parallel to the lower links. It can also be caused by excessive lifting height. Limit the lift linkage stroke to resolve this.
What to do if my KUHN EL53 has an irregular mix of plant residues?
If there is an irregular mix of plant residues, the working depth might be insufficient. Set and control the working depth to correct this issue.
The manufacturer reserves the right to make changes to products without prior obligation.
Specifies the intended applications for the EL53, such as gardening and vineyard operations.
Clarifies that illustrations may represent only one machine type but instructions apply broadly.
Visual identification of the machine's front and rear parts with diagrams.
Information on the machine's data plate for reference and spare parts orders.
Lists various optional kits that can be fitted to the machine.
Explains the meaning of hazard, caution, and information symbols used in the manual.
Safety rules for operating, handling, and preparing the machine before use.
Precautions for safe tractor and machine operation on roads and in fields.
Specific safety measures for transporting the machine on public roads.
Guidelines for safe machine attachment, PTO shaft use, and maintenance procedures.
Location and detailed explanation of all safety warning decals present on the machine.
Details on the rear red and front white reflectors required for road use.
Details on the amber reflectors mounted on each side of the machine.
Identification of machine parts with diagrams and textual descriptions.
Comprehensive data including working width, depth, power, weight, and PTO speed.
Lists standard equipment and optional depth control components.
Measured sound levels for the tractor and tractor with machine.
Requirements for the tractor, including hitch category and PTO speed.
Step-by-step instructions for safely attaching and detaching the machine.
Proper adjustment and connection of the PTO shaft and friction slip clutch.
Safe practices for handling, lifting, and transporting the equipment.
Steps to move the machine from transport to working configuration.
Methods for setting the working depth using skids or wheels.
How to adjust the rear hood to achieve desired soil tilth.
Guidelines for operating the machine safely, including groundspeed recommendations.
Details and part numbers for skid and 190mm wheel kits.
Details and part numbers for 250mm wheel kits and quick hitch compatibility.
A frequency chart outlining lubrication and maintenance tasks.
Procedures for draining and refilling the central and lateral gearboxes.
Lubrication of PTO shaft components and replacement of tools.
Tasks for storing the machine at the end of the season and preparing it for the start.
Solutions for noisy drive, excessive power requirements, and ground projection issues.
Remedies for coarse tilth, irregular residue mixing, and ridging.
Details on what is covered, exceptions, and customer responsibilities for costs.
Strict conditions for warranty validity and the process for submitting a claim.
To Next Page
General
