Kukirin G3 Pro - Product Display

4.PRODUCT DISPLAY
09
5.SCOOTER ASSEMBLE
1.Unfold the scooter and open theparking bracket
to unfold the scooter(refer to 6 unfolding steps) .
2.Straighten the body bar and applyforce
forward.
3.Confirm that the spring pin isback in place, and
turn the handleto the right to tighten.
10
4.Use the tools included in thepackage to
tighten the screws, andcheck if the power
switch is workingproperly after assembly is
complete.
®
Use the toalincluded vith |
thepackage to tighten
the screws