Kunbus FNL Series User Manual

FNL
20 / 31
Configuration of operation mode (FNL Mode)
FNL supports two operation modes to ensure the downwards
compatibility to previous FNL versions.
Illustration8: Set operation mode
KUNBUS Interface
The operation mode KUNBUS interface is to be configured for the
use of FNL in combination with the following applications:
– KUNBUS TCP/IP-Socket-based programming interface
– MODBUS TCP Server Interface
– FNL LabVIEW Driver
For details refer to the related documentation within scope of delivery
of the particular application.
Configure FNL

Kunbus FNL Series Specifications

General

Brand	Kunbus
Model	FNL Series
Category	Gateway
Language	English