GV 640 Service Manual 49
For internal use only
3. Secure the container catches.
1. Bend the catches of the hinge plate outwards
with a screwdriver.
2. Bend the metal clamps with a screwdriver.
Please note!
Make sure that it is properly positioned!
Make sure that the weight is properly installed for floor-mounted appliances.
If the heat exchanger is installed on the rinsing cavity, the joints of the hose connections
must be clean.
Do not crush the supply and discharge hoses.
Push the softening equipment into the guides.
Make sure that the power module is not jammed.
Protect the cable harness from being crushed.
To Next Page
Loading...
Need help?
General
