© Kurth Electronic GmbH, All Rights Reserved
11
MWI (depending on network operator)
In TP09D, the MWI status (Message Waiting) can be checked in monitor
mode. The phone number of the caller who initiated the message is shown in
the display. The MWI status ON or OFF is also displayed.
CIDCW-Option (depending on network operator)
If another call arrives during a call (Caller ID Call Waiting), its call number is
shown in the display of the TP09D.
DTMF-Grabbing
In monitor mode, the TP09D can decode the number dialed by another de-
vice on the line (e.g. fax, modem or other terminal) and display up to 48 digits
(DTMF dialing only).
To Next Page
Loading...